Add to Cart
Bearing Assembly:
The slurry pump bearing assembly, also called the rotor assembly,
belongs to the slurry pump accessory assembly and is an important
component of the slurry pump. It is the transmission power unit.
The bearing assembly is used to connect the pump and the motor
components to form a complete working system.
The stability of the slurry pump bearing assembly directly affects
the operation and service life of the pump
The bearing assembly of the pump adopts a cylindrical structure,
which is convenient for adjusting the gap between the impeller and
the front guard plate, and can be completely removed during
maintenance. The bearings are greased.
Precautions:
The slurry pump bearing assembly is the heart of the whole pump.
Although the value is not large compared to the whole pump, if the
installation does not meet the technical requirements, the normal
use of the whole pump cannot be guaranteed, and the slurry pump is
adversely affected. The operation of the slurry pump:
A. Improve operator responsibility and conduct appropriate
technical training
B, make a corresponding operational process
C. The operator and the repairman cooperate well and do the use and
maintenance of the slurry pump.
D, new pump or new bearing assembly, to observe the bearing
temperature, to control the operation at normal temperature, can
not run for too long at too high temperature, otherwise it will
damage the bearing
Other parts of the pump:
1. Pump Casing
Split outer casing design with cast or ductile iron with the wearing liners , which can provide high
operating pressure capabilities.
2. Impeller
The impeller may be either molded elastomer or hard metal.
Cast-iron impeller threads are better
suited for slurries.
3. Interchangeable Hard Metal and Moulded Elastomer Liners
4. Mating faces in hard metal liners are tapered to allow positive
alignment during assembly and allow
com ponents to be easily removed or replacement.
5. Impeller The impeller may be either molded elastomer or hard
metal. Cast-iron impeller threads
are better suited for slurries.
6. Hydraulic seal rings give positive sealing between mating faces
Warma slurry pump parts code:
-tell me the standard code no .we can quote you price immediately :
B1013, B15013, C2013, D3013, E4013, F6013, G8013, G10013, G12013, H14013, AL2013, BL5013,
EL15013, F8013, DH2013, EH3013, EG86013, ESH4013, FH4013, FG108013, FSH6013, GG10013,
GG1412292, GGH10292, EP4013, SL30013, FH6013, FHP6013, FG108013, GSH10013XM...
Pump replaced parts material:
1) Material: D21, G01, A05...
2) Shaft material: 45#, 40Cr, SS304, SS315...
3) Shaft sleeve material: 3Cr13, 4Cr13, SS304, SS316...
4) Lantern ring material: 304, 316, PTFE, Cu...
5) Bearing housing/ bearing end cover material: G01, D21...
6) Wet end part material: A05, A07, A49, A51, A33, A61, R08, R26, R33, R38, R55, S01, S12, S21, S42,
S50, U01, EPDM, PU, CR...
Structure of slurry pump
No. | Name | Material |
1 | Impeller | High-chrome alloy |
Natural Rubber | ||
2 | Volute casing | High-chrome alloy |
3 | Front liner plate | High-chrome alloy |
Natural Rubber | ||
4 | Rear liner plate | High-chrome alloy |
Natural Rubber | ||
5 | Liner | High-chrome alloy |
6 | Expeller | High-chrome alloy |
7 | Shaft sleeve | 3Cr13 |
8 | Water-seal ring | High-chrome alloy |
9 | Shaft | 45#steel quenching and high temprature tempering |
10 | Bearing housing | Gray Iron |
11 | Expeller ring | High-chrome alloy |
Natural Rubber | ||
12 | Front casing | Gray iron or Nodular cast iron |
13 | Rear casing | Gray iron or Nodular cast iron |
14 | Base | Gray Iron |
15 | Support | QT500-7 |
Spare parts materials
NO. | Name | code | Regular material | Alternational materials |
1 | Impeller | A05(Cr27) | A49,Rubber,304,316 | |
2 | Throatbush | 083 | A05(Cr27) | A49,Rubber,304,316 |
3 | Frame plate liner insert | 041 | A05(Cr27) | A49,Rubber,304,316 |
4 | Volute liner | 110 | A05(Cr27) | A49,Rubber,304,316 |
5 | Expeller ring | 029 | Cast iron | A49,Rubber,304,316 |
6 | Expeller | 028 | Cast iron | A49,Rubber,304,316 |
7 | Cover plate liner | 018 | Rubber | |
8 | Frame plate liner | 036 | Rubber | |
9 | Frame plate | 032 | Cast iron | Ductile cast iron |
10 | Cover plate | 013 | Cast iron | Ductile cast iron |
11 | Base | 003 | Cast iron | Ductile cast iron |
12 | 005 | Assorted |