

Add to Cart
3 Inch Electric High Pressure Slurry Pump With Interchange Replaceable Parts
Feature & Application
1) Cantilevered, horizontal, centrifugal, one stage, single casing
gravel (sand) pump
2) High head, large capacity, high efficiency.
3) Good NPSH performance.
4) Widely application: They are designed for handling more abrasive
with solids slurries in the river dredging, Sand reclamation,
explosive sludge in metal melting, dredging in dredger and course
of river and other fields.
5) Long bearing life: The bearing assembly is with large diameter
shaft and short overhang.
6) Wear resistant wet parts: The wet parts are made of Ni hard and
high chromium abrasion resistance alloys. (more than 26% Chrome
alloy).
7) The frame plate for type M AH pumps have replaceable
wear-resistant metal liners or rubber liners. The impellers are
made of wear-resistant metal or rubber.
8) Easy adjustment of impeller: An impeller adjustment mechanism is
provided below the bearing housing.
9) Centrifugal seal, mechanical seal and packing seal are
available.
10) The shaft seals for type M AH and HH pumps may be adoptable of
gland seal or expeller seal
11) The discharge branch can be positioned at interval of 45
degrees by request and oriented to any eight positions to suit
installations and applications.
Typical Applications
4 / 3E-HH High Head Slurry Discharge Pump are designed for the
handling highly abrasive,high density slurries in metallurgy
industry, mining industry, coal, power, building material and other
industrial departments. The pumps of these model also can be
installed as multi-stage series.
Tailings Delivery
Cyclone Feed
Diamond Concentrate
Slag Granulation
Bottom Boiler and Fly Ash
Mill Discharge
Specification
Model | 4 /3 E -HH |
Allowable Max. Power | 120Kw |
Capacity | 126 - 252m³ / h |
Head H | 12 -97 m |
Speed | 600 - 1400 r / min |
Max. Eff | 50% |
NPSH | 2 - 5 m |
Impeller Dia. | 508mm |
Construction Design