DX8298 Building Materials Flame Spread Index Tester AC220V BS476-6

BS476-6 Flame Spread Index Tester

BS476-6 Product introduction:

The BS 476-6 test method is a method for the determination of the flame spread properties of materials, mainly used to assess the fire performance of wall and ceiling linings, and the results are expressed as a flame spread index.

During the test, the test piece was exposed to a tubular torch with a heat release of 530 J/sec. After 2 minutes and 45 seconds of the test, the total power of the two electric heaters was adjusted to 1800 watts. When the test was 5 minutes, the power was reduced to 1500 watts, and then the power was maintained until the end of the test. The total test time was 20 minute.

Standard:

BS476-6: fire tests for building materials and components - Test methods for fire spread of products.

Features:

1. Stainless steel box support frame;
2. Calcium silicate board combustion chamber;
3. Three kinds of sample holders, stainless steel wrapping method;
4. Two 1000W quartz radiator devices provide thermal radiation to the sample;
5. T-type burner, providing open flame burning method for the sample;
6. The thermocouple continuously records the difference between the temperature in the chimney and the room temperature;
7. The power output is automatically controlled, and the output power is automatically adjusted according to the test time; 8. The computer automatically processes the data and can print the test report.

BS 476 Common Standard for Construction Materials:

BS 476-3 fire tests on building materials and components - fire tests on exposed parts of roofs
BS 476-4 fire tests for building materials and structures - Tests for non flammability of materials
BS 476-6 fire tests for building materials and components - Test methods for fire spread of products
BS 476-7 fire testing of building materials and components - Test Method for determining the classification of flame surface spread of products
BS 476-8 fire resistance testing of building materials and components - fire resistance test methods and evaluation of building components
BS 476-11 fire tests of building materials and components - Determination of thermal radiation of building materials
BS 476-12 fire tests of building materials and components - Test Method for flammability of products in direct contact with flame
BS 476-20 fire tests of building materials and components - Test methods for fire resistance of building components (general principles)
BS 476-21 fire tests for building materials and components - Test methods for fire resistance of load-bearing components
BS 476-22 fire tests for building materials and components - Test methods for fire resistance of non load bearing components
BS 476-23 fire tests of building materials and components - Test Method for the contribution of components to the fire resistance of components
BS 476-24 fire tests for building materials and components - Part 24: Test methods for fire resistance of ventilation ducts
BS 476-31.1 fire tests of building materials and components - Methods of measuring smoke penetration through door and window assemblies - Methods of measurement at room temperature.

Flame Spread Index Tester Main parameter: