IEC60851 Breakdown Voltage Tester
Brand Name:DAXIAN
Certification:GB/T7106
Model Number:DX8499
Minimum Order Quantity:1 set
Delivery Time:30 days after order confirmed
Payment Terms:L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Electrical Breakdown Voltage Tester For Enameled Wire
Introduction of withstand voltage tester:
It is suitable for enameled wire, electronic wire, PVC wire, etc.
in air medium, under a certain temperature, the power frequency
voltage (48 ~ 62Hz) of high voltage is raised at a specific speed
between the insulation layer and the conductor at a specific speed
until breakdown, so as to measure the breakdown voltage of the
tested object. It is applicable to the method of continuous and
uniform voltage rise or step-by-step voltage rise. The AC voltage
is applied to the sample until it breaks down. The breakdown
voltage value is measured and the breakdown strength of the sample
is calculated. The voltage is raised to the specified value by the
method of rapid voltage rise, and the sample does not break down
for a certain period of time. The specified value is set as the
withstand voltage value of the sample.
Standard:
IEC60851,IEC60950-U.2.1
Technical parameters:
Test voltage | AC 0 ~ 15 kV electronic boost |
Transformer capacity | 500VA |
Breakdown voltage | 0 ~ 15kV |
Boost rate | 20V / s, 100V / s, 500V / S |
Leakage current selection | 1 ~ 20 mA |
Power supply | AC380V 50 / 60Hz |
Metal bar | 25, 50 |
1. Step up speed regulation: it is electric automatic speed regulation
2. Voltage measurement accuracy: ≤ 2%
3. Test method: AC test
4. Boost mode: automatic program control
5. Power frequency: 50 Hz sine wave
IEC60851 Breakdown Voltage Tester
Inquiry Cart
0