ASTM D1929 Ignition Temperature Of Plastics Testing Equipment ISO 871 In Laboratory

ASTM D1929 Ignition Temperature of Plastics Testing Equipment ISO 871

Application:

This plastic ignition temperature testing equipment test method covers a laboratory determination of the flash ignition temperature and spontaneous ignition temperature of plastics using a hot-air furnace.

Standards:

- ISO 871

- ASTM D 1929

- GB/T 4610

- GB/T 9343

Specification:

Temperature of copper furnace:

- Can be constant between 150~450 ℃ ;

- Equipped with built-in fan to provide air source, and precise control of the flow meter is equipped with imported gas flow;

- Insulating layer is made larger than 60mm thick mineral wool insulation composed of external stainless steel package;

- Three import thermocouple temperature instrument detects the furnace temperature and the sample temperature;

- The sample container is made of stainless steel;

Furnace tube inner diameter:

- 100 ± 5mm, length 240 ± 20mm, not less than 750 ℃ temperature ceramic tube;

Inner tube diameter 75mm ± 2mm, length 240mm ± 20mm, temperature not lower than 750 ℃;

Stainless steel container Dimensions:

- diameter 9mm, height 48mm;

Butane lighter:

- inside diameter of 0.8 ± 0.1mm nozzle, the flame height 10 ~ 20mm (adjustable);

Timer Accuracy :

- 0.1s;

- Automatic temperature program;

Ambient temperature:

- room temperature ~ 40 ℃;

Humidity:

- ≤75%;

Voltage:

- AC 220 V ± 10V 50HZ; use of power: 600W;

Temperature control accuracy:

- ± 2 ℃, can be adjusted between 150 ℃ ~ 450 ℃;

Display accuracy:

- ± 0.5 ℃;

Weight:

- 20 Kg.

Dimensions:

- test furnace (0.4 × 0.4 × 0.5) m;

About daxian company:
Daxian's testing equipment are widely used in various field:Scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, led, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable, textile and fabrix, etc.All daxian testing equipment are designed according to international test standards, such as iso, astm, din, en, gb, bs, jis, ul, tappi, aatcc, iec, vde, csa, cen and so on.