High Density GEPON / EPON SFP Module For Passive Opitacal Access Network
Brand Name:NATYWISH
Certification:CE, FCC, RoHs
Model Number:NTW - GES20++AS
Minimum Order Quantity:1pcs
Delivery Time:10 - 15 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
708-709 room,G buliding,ZhiGu Technology Park,YinTian Road,Xixiang, Bao'an District, Shenzhen City
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
GEPON / EPON PX20++ OLT Optical SFP Module Tx1310nm Rx1490nm 20km ,
SC
single fiber singlemode for EPON OLT device.
PON Overview
- Ethernet Passive Optical Networks (GEPON or EPON) is the leading technology being used in FTTx (FTTH) deployments. PON is different than other optical network topologies in that it is a Point to Multi-Point (P2MP) topology. From the Central Office’s (CO) Optical Line Terminal (OLT, with SFP GEPON transceiver/module) a single strand of fiber goes out to a passive optical splitter where its signal is multiplied to 32(64) different lines. The Transmit and Receive signals operate on different wavelengths allowing bi-directional operation over a single fiber. Anything transmitted from the OLT is transmitted to all 32 lines. It is up to the customer’s system (Optical Network Unit - ONU) to determine what packets are for that customer. All other packets are discarded. The PON current standards have defined downstream data rates up to 1.25Gbps.
- IEEE 802.3ah. EPON or GEPON (Ethernet PON) is an IEEE/EFM standard for using Ethernet for packet data.
Product Application
• Passive Opitacal Access Network
• Fiber to the Home
• Fiber to the Building
• Fiber to the Curb
Product Features
- Compatible IEEE 802.3ah 1000BASE-PX20++ GEPON application
- Applied to EPON OLT for a Single Fiber Bi-directional EPON System
- SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472
- Burst Digital Receiving Signal Strength Indication (RSSI)
- Single 3.3V power supply
- Operation case temperature -10~70°C for commercial
- RoHS-6 compliance
Optical Characteristics
| Parameter | Unit | Min. | Typ. | Max. | ||
| TX Central Wavelength | nm | 1480 | 1500 | |||
| Spectral Width (-20dB) | nm | 1 | ||||
| SMSR | dB | 30 | ||||
| Mean Launched Power | dBm | 5 | 8 | |||
| Mean Launched Power (TX Off) | dBm | -39 | ||||
| Extinction Ratio(Note 1) | dB | 9 | ||||
| TX Total Jitter | UI | 0.43 | ||||
| Rise/Fall Time (20%-80%) | ps | 260 | ||||
| RIN15OMA | dB/Hz | -115 | ||||
| Optical Return Loss Tolerance | dB | -12 | ||||
| Transmitter and dispersion Penalty(20km G.652) | dB | 2.3 | ||||
| TX Optical Eye Mask | Compliant With IEEE Std 802.3ah™-2004 | |||||
| Receive Wavelength | nm | 1260 | 1360 | |||
| Sensitivity (Note 2) | dBm | -33 | ||||
| Overload | dBm | -6 | ||||
| Dynamic Rang | dB | 25 | ||||
| Receiver Threshold Settling Time | ns | 250 | ||||
| RX Dynamic Range(Note 3) | dBm | -30 | -6 | |||
| LOS-Deassert | dBm | -34 | ||||
| LOS-Assert | dBm | -45 | ||||
| SD Hysteresis | dB | 0.5 | 6 | |||
| Receiver Reflectance | dB | -12 | ||||
Note:
- Measured with PRBS 27-1 test pattern @1.25Gbps, Low Pass Filter is on.
- Measured with a PRBS 27-1 test pattern @1.25Gbps and ER=10dB, BER <10-12
3, RX Dynamic Range Definition
Electrical Characteristics
| Parameter | Unit | Min. | Typical | Max. |
| Power Supply Current | mA | 300 | ||
| Data Input Differential Swing | mV | 200 | 1600 | |
| Data Differential Impedance | Ω | 90 | 100 | 110 |
| TTL Input -Low | V | 0 | 0.8 | |
| TTL Input -High | V | 2.0 | Vcc | |
| TTL Output -Low | V | 0 | 0.4 | |
| TTL Output -High | V | 2.4 | Vcc | |
| Data Output Differential Swing | mV | 400 | 1600 | |
| Los Assert Time | ns | 500 | ||
| Los Deassert Time | ns | 500 |
Ordering Information
| Ordering P/Ns | Description |
| NTW - GES20++AS | EPON OLT PX20++ Diplexer, 30km, Tx 1490nm 1.25G, Rx 1310nm 1.25G, SFP form-factor, SC/UPC receptacle connector, Commercial temperature. |
High Density GEPON / EPON SFP Module For Passive Opitacal Access Network
Inquiry Cart
0