Hydraulic Electric Motor Valve / Central AC Fan Coil Motorized Diverter Valve

Hydraulic Central Air Conditioner Fan Coil / Electric Motor Valve

Technic parameters

Features
1.Inlay contact switch, the motor is power off after the valve completes open and close, so it has long service life and power saving, but is also safe.
2.The valve body is separated with driver, could be disassembled rapidly.
3.The valve body structure is unique, is allowed of big pressure difference.
4.The driver has manual controller is available for system debugging and maintenance, the manual opening is about 70% (push down the white driving arm to the bottom, and then push inside, when the power is recovered, the valve and driver will return to automatic position)
5.B type driver has inlay relay, one-line control and three-speed switch, realize multi valves parallel, and match with various temperature control switches. (special for four-pipe)
6.Select ordinary driver, one temperature controller matches only one electric vale, or any results caused will be nothing with manufacturer.

Pipe Connecting Instruction

Motorized control valve should be mounted on cold/hotwater inlet or outlet pipe of fan coil unit for opening orclosing cold /hot water. The actuator is controlled by theroom thermostat.

2-way valve(see Fig 1) is installed on cold/hot return water (CHR) pipe , when de-energized, the rubber insidenormally closed at port "B" , stop water flow. when energized, the rubber moved from port "B" to the centerof port "B" & "A" and cold/hot water flow through 2-wayvalve to return water pipe.

​

When the actuator is de-energized, spring returnmechanism drives valve to normally closed position,port "B" is closed . Cold/hot water inlet from port "AB"(bottom)by-pass to port "A" to return water pipe ,

when energized , rubber is moved from port "B" to port"A" and closed. Cold/hot water inlet from port "AB"through port "B" to fan coil unit then outlet to returnwater pipe.

Caution:

Heated floor thermostat.com

We started producing electric in-floor heating in Jiangsu,China almost eight years ago in 2011 and have been growing steadily ever since. In 2015 we started selling our own specially-designed lines of in-floor heating products and two years later once we were confident had a winning product line we started offering them on-line to customers like you all across North Europe. During the summer of last year our sales had grown so much that we moved distribution and fulfillment from Lishui Distrct,Jiangsu to Jiangning Distrct, Jiangsu where we now have more space and offer quicker freight to many parts of the country more easily and at a lower cost than before.

I invite you to check out our competitive pricing and to send us a request or call me personally if there is anything we can do to help you get started.

Control solutions with low cost
Product customized
Friendly and honest service
Continuous improvement