Automatical Nitrogen - Hydrogen Mixing Device Industrial Gas Mixer High Joint Strength

Individualized Design , Hydrogen-Nitrogen Mixing Device , Space-saving

Overview

The nitrogen/hydrogen mixing device is mainly used to control the flow of hydrogen/nitrogen to achieve a certain proportion of hydrogen/nitrogen mixture. In general, less gas flow is to control the content, a hydrogen nitrogen mixing device is mainly composed of nitrogen gas flow meter, hydrogen flow meter, hydrogen analyzer, PID controller flow control valve, pressure gauge etc

The device is working automatically. Compare with the set value, so the hydrogen added can be controlled, and ensure that the hydrogen content in the post-grade gas is in the specified range.

Hard brazing

Brazing solder has a melting point of more than 450°C and high joint strength, The strength of hard brazing joints is high, some kinds of brazing solders can be used in high temperature. There are many kinds of solder for hard brazing, the most widely used solder based on aluminum, silver, copper, manganese and nickel. Aluminum base solder is often used for brazing aluminum products. Silver base copper filler metal is often used for brazing copper and iron parts.

Brazing Process

The surface of the cleaned workpiece is assembled in lap mode and the solder is placed near the joint clearance or between the joint clearance. When the workpiece and solder are heated to a temperature slightly above the solder melting point, the solder melts (the workpiece does not melt), and it is inhaled and filled with between the solid workpiece clearance through capillary. The liquid solder and workpiece metal diffuse and dissolve each other, and the brazing head is formed after condensation.

Xi'an Aojie Electric Heating Equipment Engineering Co., Ltd. is a premier manufacturer of mesh-belt controlled atmosphere continuous brazing furnaces and industrial heat treat systems.

Started in early 1990s, Xi'an Aojie designed and manufactured its first mesh-belt controlled atmosphere continuous brazing furnace. In the years that have followed, Xi'an Aojie has committed to independent research and development of advanced brazing furnaces and heat treat equipments.

Nowadays, Aojie mesh-belt continuous controlled atmosphere brazing furnace has successfully replaced imported equipment due to its unique advantages. Aojie mesh-belt controlled atmosphere brazing furnaces are widely used for brazing parts of stainless steel, carbon steel, aluminum, brass and copper, etc. by the industries of automobile, aero-space & aviation, and household appliances, etc.

To serve the aero-space & aviation industry, Aojie developed high, intermediate and low temperature high precision electric heating car bottom furnaces which meet temperature uniformity requirements set by US Military Specifications.

Aojie also developed BAB production lines for the production of stators and rotors of high efficiency and power economized motors.

Xi'an Aojie is a full service supplier, beginning with initial technical services such as feasibility studies, facility analysis and planning, continuing through equipment manufacturing, system installation, furnace start-up and operator training.

Aojie is always untiringly seeking to provide dependable equipment and technical support for customers to manufacture high-quality and low-cost products.

Some of our customers are as follows: