12v DC Mini Diaphragm Pump Modern High Grade 170kpa Pressure For Exhaust Air
Brand Name:Feiyinsi
Certification:Rohs,Reach
Model Number:Z312-7006-6000
Minimum Order Quantity:50pcs
Payment Terms:Western Union, , T/T, L/C,paypal
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
5th floor, Zhongpeng Building, Zhongpengcheng Industrial Park,The 4th Industrial Zone of Heshuikou, Gongming Street, Guangming New District, Shenzhen, China
Supplier`s last login times:
within 22 hours
Product Details
Company Profile
Product Details
Modern high-grade mini diaphragm 12v dc medical pump for exhaust air
how to choose pump?
In short, the gas sampling pump can only carry a small load (i.e.,
the pump suction end’s resistance can not be too big, but the price
is cheap; in the strict sense, the miniature vacuum pump can carry
a large load (the suction end allows large resistance, or even
completely clogged up, but the price is slightly higher. The
resistance of the pump can be measured by means of instrument.
Comparing it with the por of maximum allowable resistance of air
inlet in the pump's technical parameter, we can know whether the
type selection is appropriate or not. It is usually determined by a
simple method based on experience. For example, the following
conditions are of high load (that is, the pumping end of the pump
has greater resistance and can only be selected within the scope of
the miniature vacuum pump):
1. At the pumping end of the pump to be connected to a very long
pipe, or pipe bending points, severe bending will even block
closed, or the pipe has a very small hole (for example, less than φ
2 mm);
2. There are throttle valves, solenoid valves, air path switches,
filters and other components on the pipeline;
3. The pump outlet is connected with the closed container, or the
container is not airtight but the air intake is small;
4. The pump outlet is connected with the closed container, or the
container is not airtight but the air intake is small;
5. The pumping end of the pump is connected to the filter
container, which is used to speed up liquid filtration.
6v air vacuum pump's parameter and features
1.High temperature performance, good consistency
2.Oil resistance and easy installation
3.DC brush motor
4.Long life span, low heat.
5.Heavy duty work for 24 hours and Continuous operation
6.The key parts are imported
7.Can work for long hours
Model | Z312-7006-6000 |
Size(mm) | 32.8*50*70 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 9 |
Free Flow(L/M) | 8 |
Pressure(Kpa) | 170 |
Vacuum(Kpa) | -65 |
Weight | 160 |
Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
Special requirements for materials about 6v air vacuum pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
environmental testing requirements about 6v air vacuum pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After 50 cycles was returned to room temperature.0.5h later,pumping power test is conducted. The pump should be able to work properly; fasteners should not loose , in working condition pump’s body should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After 0.5hours later, at room temperature power pump. Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power the pump and test it.( when testing the pump,pump’s body can not have ice ). Fastening points should be no loose. The pump can work normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started |
Electrical Performance about 6v air vacuum pump
| Number | Item | requirements |
| 1 | Insulation resistance | 10MΩ / between wire and frame measurements , 500VDC / min |
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min |
6v air vacuum pump's dimension
Unlabeled tolerance is ± 0.1mm.
Pump Size:32.8*50*70mm
Pump Weight:160g;
Outlet:OD 5.8mm, silicone hose suggestion:ID 4.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
6v air vacuum pump's application
1. breast pump
2. Beauty equipment
3. Vacuum packaging machine
4. Double-headed electric breast pump
5. Portable ozone sterilizer
6. Vacuum sealing machine
7. Beauty massage
6v air vacuum pump's packing and shipping
Packaging:
CTN/PCS: 75PCS
G.W. : 12 KG
DIMENSION : 47 * 31 * 25 CM
Picture’s about the packaging:
We can ship pumps to you by sea, by air or by express.
By sea: cheap but long
By air: quick but a a little expensive
By express: door to door, 3-5days to your country by
DHL/UPS/FEDEX/TNT and others.
The fastest, but most expensive.
You can choose according to your needs.
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 3 L/min and 8L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
6v air vacuum pump's production process
The company consists of a professional design department, mold
department, injection department , assembling workshop.
All products of the company have independent intellectual property
rights and patents. We can independently design and produce. In
addition, we can assemble productions in strict accordance with the
ISO9001-2015 system. The company has passed ISO9001 certification.
"Feiyinsi" is a registered trademark of our company .Based on the
soul purpose "we are implementing the principle of “quality and
service is the first” all the time, taking the highest industry
standard to control every procedure.
Why choose us?
(1) Various pumps in no MOQ and competitive prices.
(2) Professional website platform and one-to-one online service.
(3) We are factory. And we have our own professional R&D
department. We accept the order if you want to customize products
or design the product.
(4) Fast delivery for normal order, for the bulk quantity, it
depends on your specific requirement.
(5) Products are all covered with warranty and insurance.
User Instructions
1. will not guarantee the products if the application of our
products are exceeded the limitation which is specified on this
specification.
2. In case of changes of the specification specified on this
document. A written notice is requested in advance.
3. there is any data or related documentation different from this
data sheet.This data sheet is the principle reference.
4. Please do not use it in the environment of corrosive gas or
liquid or any detrimental gas. 5.While the motor is in
operation,please do not lock the motor intentionally for a long
periods,since the continuous stoppage will result in overheat and
thus burnt out the motor.
12v DC Mini Diaphragm Pump Modern High Grade 170kpa Pressure For Exhaust Air
Inquiry Cart
0