Black SMD BGA Rework Station High Performance With Accurate Temperature

Smt Line Machine BGA Rework Station smd pcba repair machine semi-Auto For iphone ipad Macbook Logic Board Repair

High-quality heating core structure is reasonable design, fine workmanship, symmetry, long service life
After the airflow passes through the heater core, the temperature is even and the wind speed is gentle.

new BGA rework station fully uses German imported materials, superior performance
1. Evenly out of the wind to ensure that the four corners of the chip solder melt simultaneously
2. Accurate temperature, not bake chips
3. Do not need to dry circuit boards and chips before desoldering chips
4. Long service life, 3 years replacement

Problems with inferior heater cores:
1. The wind is not uniform, after soldering, the chip does not melt while the solder melts.
2. Partial solder joints after welding
3. After the circuit board is repaired, it is re-welded in a short time
4. During the welding process, the chip is bent, bulged, sunken, blistering, abnormal sound
5. The circuit board must be dried prior to welding, otherwise the success rate of welding cannot be guaranteed.
6. Short service life, easy to burn out, need to be replaced regularly

The picture above is the stencil of the tuyere
The size of the steel mesh is carefully calculated, the middle hole is small, and the surrounding holes are large.
This design allows the hot air blown by the tuyere to be about 5 degrees cooler than the ambient temperature.
This hot air feature is very beneficial to protect the chip, to avoid chip damage at high temperatures.

CNSMT was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.