Customized Bovine ELISA Kits Beta - Hydroxybutyric Acid BHBA 2 Hours Assay Length

Bovine Beta-hydroxybutyric Acid ELISA Assay Kit Customized BHBA ELISA Test Kit 2 Hours Assay Length

Cat.No E0267Bo

Assay Principle
This ELISA Assay Kit is an Enzyme-Linked Immunosorbent Assay (ELISA). The plate has been pre-coated with Bovine BHBA antibody. BHBA present in the sample is added and binds to antibodies coated on the wells. And then biotinylated Bovine BHBA Antibody is added and binds to BHBA in the sample. Then Streptavidin-HRP is added and binds to the Biotinylated BHBA antibody. After incubation unbound Streptavidin-HRP is washed away during a washing step. Substrate solution is then added and color develops in proportion to the amount of Bovine BHBA. The reaction is terminated by addition of acidic stop solution and absorbance is measured at 450 nm.

Standard Curve Range: 10nmol/ml - 4000nmol/ml
Sensitivity: 4.89nmol/ml
Size: 96 wells
Storage: Store the reagents at 2-8°C. For over 6-month storage refer to the expiration date keep it at -20°C. Avoid repeated thaw cycles. If individual reagents are opened it is recommended that the kit be used within 1 month.
*This product is for research use only, not for use in diagnosis procedures. It’s highly recommend to read this instruction entirely before use.

Intended Use
This sandwich kit is for the accurate quantitative detection of Bovine Beta-hydroxybutyric Acid (also known as BHBA) in serum, plasma, cell culture supernates, cell lysates, tissue homogenates.

Specimen Collection
Serum Allow serum to clot for 10-20 minutes at room temperature. Centrifuge at 2000-3000 RPM for 20 minutes.

Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 15 minutes at 2000-3000 RPM at 2 - 8°C within 30 minutes of collection.

Urine Collect by sterile tube. Centrifuge at 2000-3000 RPM for approximately 20 minutes. When collecting pleuroperitoneal fluid and cerebrospinal fluid, please follow the procedures above-mentioned.

Cell Culture Supernatant Collect by sterile tubes when examining secrete components. Centrifuge at 2000-3000 RPM for approximately 20 minutes. Collect the supernatants carefully. When examining the components within the cell, use PBS (pH 7.2-7.4) to dilute cell suspension to the cell concentration of approximately 1 million/ml. Damage cells through repeated freeze-thaw cycles to let out the inside components. Centrifuge at 2000-3000 RPM for approximately 20 minutes.

Tissue other body fluids Rinse tissues in PBS (pH 7.4) to remove excess blood thoroughly and weigh before homogenization. Mince tissues and homogenize them in PBS (pH7.4) with a glass homogenizer on ice. Thaw at 2-8°C or freeze at -20°C. Centrifuge at 2000-3000 RPM for approximately 20 minutes.

Note

• Sample concentrations should be predicted before being used in the assay. If the sample concentration is not within the range of the standard curve, users must contact us to determine the optimal sample for their particular experiments.
• Samples to be used within 5 days should be stored at 2-8°C. Samples should be aliquoted or must be stored at -20°C within 1 month or -80°C within 6 months. Avoid repeated freeze thaw cycles.
• Samples should be brought to room temperature before starting the assay.
• Centrifuge to collect sample before use.
• Samples containing NaN3 can’t be tested as it inhibits the activity of Horse Radish Peroxidase (HRP).
• Collect the supernatants carefully. When sediments occurred during storage, centrifugation should be performed again.
• Hemolysis can greatly impact the validity of test results. Take care to minimize hemolysis.

*Sample can't be diluted with this kit. Owing to the the material we use to prepare the kit, the sample matrix interference may falsely depress the specificity and accuracy of the assay.

Reagent Preparation
All reagents should be brought to room temperature before use.
Standard Reconstitute the 120μl of the standard (4800nmol/ml) with 120μl of standard diluent to generate a 2400nmol/ml standard stock solution. Allow the standard to sit for 15 mins with gentle agitation prior to making dilutions. Prepare duplicate standard points by serially diluting the standard stock solution (2400nmol/ml) 1:2 with standard diluent to produce 1200nmol/ml, 600nmol/ml, 300nmol/ml and 150nmol/ml solutions. Standard diluent serves as the zero standard(0 nmol/ml). Any remaining solution should be frozen at -20°C and used within one month. Dilution of standard solutions suggested are as follows:

Wash Buffer Dilute 20ml of Wash Buffer Concentrate 30x into deionized or distilled water to yield 600 ml of 1x Wash Buffer. If crystals have formed in the concentrate, mix gently until the crystals have completely dissolved.

Summary
1. Prepare all reagents, samples and standards.
2. Add sample and ELISA reagent into each well. Incubate for 1 hour at 37°C.
3. Wash the plate 5 times.
4. Add substrate solution A and B. Incubate for 10 minutes at 37°C.
5. Add stop solution and color develops.
6. Read the OD value within 10 minutes.

Calculation of Result
Construct a standard curve by plotting the average OD for each standard on the vertical (Y) axis against the concentration on the horizontal (X) axis and draw a best fit curve through the points on the graph. These calculations can be best performed with computer-based curve-fitting software and the best fit line can be determined by regression analysis.

Shanghai Korain Biotech Co. was built in 2010. As an creator in reagents and tools for life science, Korainbio provide researchers with tools and scientific support including 30,000 antibodies, 1000+ proteins and 5000 ELISA kits. We aim to be a leading provider with world-class level for the researchers all over the world. Our products line covers a set of research areas including Immunology, Neuroscience, Cancer, Kinases, Phosphatases and Cell Biology.

Bioassay Technology Laboratory (BT Lab) as a leading brand of Korainbio focused on helping researchers to optimize life science work and serves as a provider of test and developing services, including elisa tests, WB test and antigen development. Founding in 2010, our strategic focus has been on the development of enabling technologies in the research, development, manufacture and marketing of innovative immuno products and services based on molecular technologies.

Korain’s reagents are supported by superior processional team and a quality management system that is certified for CE and ISO. Our product development program for use in a variety of applications including:

ELISA and immunohistochemistry

• Immunoprecipitation
• Immunohistochemistry
• Immunofluorescence microscopy
• Immunohistochemistry
• Quantitative Multiplexing

About BT Lab

As a leading brand of Korainbio, Bioassay Technology Laboratory (BT Lab) offers a variety of cost-effective ELISA kits and sets to measure cytokines, chemokines, and soluble biomarkers consistently and reliably. Sandwich kit and Competitive that provide the core reagents our selection of ELISA products meets the demand of ELISA beginners to experts alike at a very economical price.

Worldwide Distributors

ELISA Kit Categories

Sandwich Kit
Sandwich kits are fully validated and ready-to-use, containing 96- well strip plates pre-coated with capture antibody to detect sample antigen.

Competitive Kit
In a competitive ELISA assay, sample antigen and labeled antigen compete for capture antibody binding. The more target protein there is in the sample, the less labeled antigen will be captured and the weaker the signal.

Qualitative Kit
Qualitative results provide a simple positive or negative result for a sample. In quantitative ELISA, the optical density (OD) of the sample is compared to a standard curve, which is typically a serial dilution of a known-concentration solution of the target molecule. It is suitable for detecting small antigens.

Advantages of our Sandwich kit

Without Diluting Sample

• Save assay time
• Wide detection range
• Reducing non-specific interactions between the sample matrix proteins

Streptavidin-biotin system

• Significant non-specific binding can be prevented by strepvidin
• Reducing interference from residual biotin in sample
• A non-covalent interaction with high affinity

Washing Step

• Only 5 times for one step

Pre-Coated plate

What We Provide

• Product datasheet, product image, MSDS, publican references
• Order by emailor phone.
• Quality Guarantee with ISO and CE certificate
• Within 36 hours to your inquiry
• Support by professional team who are specializes in life science.
• Delivery to more than 100 countries
• Special packaging according your request

What We Aim to

• Optimize your R&D with our tools
• Build a friendship with every single customer
• Devoted ourselves to providing researchers with professional support

If you’re interested in working with us to expand the market, please feel free to contact us by: save@bt-laboratory.com