SS304 150kg Roller Conveyor Scale

RC6060-IN420 roller conveyor scale with programmable thermal printer and sticker printer, with LED light alarm.

High Accuracy Conveyor Weigh Scale SS304 With Programmable Thermal or Sticker Printer

roller conveyor scale Capacity:150kg

Accuracy: OIML C3 100g, 150G. OR HIGHER PRECISION: 10g, 15G.

Function:

1. With Programmable printer

2. RS485 or RS232 Output /Modbus rtu available

• Free PC software with programmable for Printer
• Counting scale function

Special Function

• Fast speed
• High accuracy

roller conveyor scale Weight Controller Function:

• Auto zero scale • Auto zero tracking • Normal weighing

• Peak • Counting • Zero scale • Gross/Net
• Tare • RS-232C • RS-485 • Print interface (PS805 Printer)

roller conveyor scale an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles

per second and drives up to eight 350Ω or sixteen 700Ω load cells.

With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications

and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.

Counting scale working

According to the 2.2 regular, system working parameter F10=2, The controller will working at counting scale, the counting of the operating panel will be light on.

This indicating controller can do 100 different kinds of counting of the weighing. Before do the counting weighing, should according to the 4^th regular of the , do the average weight setting of all the loading weight. And make sure the current loading code is same as counted loading code.

Working at weighing, press【↑/Accumulate】button, display window show the current loading goods code as “P= XX”, “XX” means the current loading good, can use 【→/Auto】,【↑/Accumulate】 button do the revising. After revising, press 【Exit】 button to back to the weighing working.

If the current loading goods had not done the average weight setting, the

Indicating controller will display “– – E6 – –”, should according toto set the average weight of the current loading goods.

If press 【→/Auto】button when weighing, can handover counting and weighing working of the indicating controller.

When”Auto” light on, the indicating controller is working at counting, display window show “n XXXXX”, it means the loading goods qty.

When 【→/Auto】light on, the indicating controller is working at weighting, display window show the weight of the loading goods, it is the common weighing.

High precision load cell for roller conveyor scale

High precision weighing display for roller conveyor scale

Metal parts for the roller conveyor scale

Rollers for roller conveyor scale

• COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000
• COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000
• Material: Stainless steel SS304
• IP Rating: IP66
• LED 6-digit display
• Power Supply: AC adaptor, 100-240VAC, 50-60Hz
• Parameter and calibration settings are performed on the front panel
• LABRADOR computer software for parameter and calibration settings
• Units of Measurement: kg, lb
• Improper operation and fault indication
• Two way relay signal output
• Equipped with RS-232 and RS-485 connecting ports
• Print functions with programmable print format
• Built-in clock

Weight Controller Data

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!