Factory Direct Supplied Small Simple Gantry Crane for Workshop Mobile Gantry Crane saled in China

Factry Direct Supplied Small Simple Gantry Crane for Workshop Mobile Gantry Crane saled in China

Brief Introducion:

1.A-frame Mobile Gantry Crane can be omni-directional mobile small light lifting equipment.

The girder of A-frame Mobile Gantry Cranegirder is made from I beam,which is bearing the load and also as the traveling track of hoist.

The A-frame Mobile Gantry Crane is equipped with a universal wheel which can move omni-directional on flat ground.The main girder and leg are connected through flange plate with high strength bolt connection, can be disassembled or assembled quickly,or moved to another working site.

Normally, the A-frame Mobile gantry crane lifting capacity: 0.25ton~20ton,lifting height:3m~10m or customized ,span:5~10m, Working temperature : -20-40 degrees,Working class: A2~A3.

2.Component of A-frame Mobile Gantry Crane Supplier With Competitive Price :

-Gantry frame (main beam, leg, ground beam)
-Hoist trolley
-Crane travel mechanism
-Ground control/Remote control

-Electrics

Technical Parameters:

Mini gantry crane structure:

Safety Devices for gantry crane:

To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other

equipments as following:

1.Overload Limit Switch

2. Rubber Buffers

3.Electric Protective Devices

4.Emergency Stop System

5.Voltage Lower Protection Function

6. Current Overload Protection System

7. Rail Anchoring

8.Lifting Height Limit Device

MD Crane Cases in China Domestic and International Market:

Company certificates:

MD Crane will do more than the certificates required to guarantee the quality of our cranes.

FAQ ABOUT MD CRANES:

1.Can the cranes be customized?

Yes,every customer’s working condition is different, all of our products can be customized depend on customers’ requirements. Please give us the information as clear as you can, so we can give our best design to suit for your demands.

2.How many operation methods for my selections?

We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.

4.I have low headroom in my workshop, is it possible to install a crane in it?

We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.

5.Do you supply lift tools?

Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...

6.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:

1. Lifting capacity.

2. Span length.(rail center to rail center)

3. Lifting height.(hook center to ground)

4. Have you installed the rails? Do you need us to supply the rails? How long is it?

5. Power supply: Voltage.

6. Working condition: what kind of material to lift? temperature?

7. It would be much better if it is possible for you to offer the drawing photo of your workshop.

Customized Design &Production Accepted According to Your Using

Situation, Please Contact Us for Further Communication:

Email/Skype: sales@md-cranes.com

Tel/whatsapp:+8613953895525

Or

Just send inquiry to us, we will do the rest for you!

Shandong Mingdao Heavy Industry Machinery Co., Ltd. is mainly engaged in the design, manufacture,installation and maintenance of single girder overhead cranes(LD Models), Double Girder Overhead Cranes (LH,QD etc),gantry cranes(MH,MDG..),Jib cranes(BZ,QZ,MZ etc）, frequency inverter cranes, Explosion-proof series cranes(LB,QB etc), Cranes with grab bucket, Low headroom Hoist, Electric Winches, Construction Cranes, Clean Room Cranes and CD1 MD1 HC Electric Hoist, Hand Chain Hoist ETC...

CUSTOMER CASES PLEASE CLICK HERE

We are a member of China Lifting Industry Association, safety-recognized enterprise, national crane machinery designated production organizations, we have obtained mechanical engineering "design certificate", and the national issued crane "manufacturing permit",installation and maintenance, renovation and maintenance of the "License" and so on.

In the past 10 years, we are aiming at China domestic market and become a leading manufacturer in China. Also, with the help of China trading companies we have exported our products to many countries such as Vietnam, Philippines, Sri Lanka, Bangladesh, France, Dubai, Kazakhstan, Russia, Tanzania ，Peru , Newzealand,etc countries . We got 99% good feedback from the overseas customers.

Now we are not only aiming at China domestic market growth ,but also to expand the international market with our quality and price advantages. Send us an inquiry now.

The company has six functional departments, including R&D department, sales department, materials supply department, production department, QC department,after-sales department. There are 16 workshops including electrical, riveting, forging, assembly, heat treatment, machining and maintenance.

Our company produces various lifting equipment and loading and unloading. The equipment is 30,000 tons and the sales income is 360 million yuan. 18 offices and 76 sales and service agencies in power plants, industrial and mining enterprises, and port terminals.

Integrity, quality, customer satisfaction is the pursuit of Mingdao heavy workers!

MD CRANES, LIFT YOUR DREAMS UP!