

Add to Cart
Material and Operation Conditions
Media | Domestic Glass fiber HV Glass fiber |
Sealant | PU Polyurethane |
Cabinet | Aluminum/Galvanized/Stainless steel |
Separator | EVA hot melt adhesive |
Gasket | PU Polyurethane, EVA, Neoprene |
Filter Efficiency (EN1822) | H13:99.97-99.99% 0.3μm H14:99.995-99.999% 0.3μm |
Max. Temperature | 70℃ |
Max. Humidity | Domestic Glass fiber: 80% HV Glass fiber: 100% |
Product Introduction
Disposable HEPA filter with Hood is terminal filter for a variety
of filtration systems, closed structure to prevent internal voids
and leaks. Anodized aluminum casing quality, light weight, can full
stick PEF cotton insulation. Include air input duct with optional
diameter Φ250, Φ30, Φ350. Each filter has been strictly tested
before factory.
Features: Strong ventilation, good looks, easy installation, Good sealing
performance, light weight, high filtration efficiency.
Applications: Operating room, laboratory, pharmacy, microelectronics, film,
optical equipment and food processing plants and other which demand
high clean class level work environment.
1). The Gel Seal filters are available in HEPA or ULPA
efficiencies.
2). The dimple pleated filter pack is sealed in an anodized
aluminum frame that contains a gelled channel to insure a leak
free, tight seal.
3). The filter element is protected by an anodized aluminum housing
and diffuser screen, with a damper control and challenge port for
the measurement of challenged aerosol.
4). An anodized extruded aluminum center divider with access port
provides access for adjustment of the distribution plate and
measurement of the resistance and challenge aerosol.
5). A painted expanded metal faceguard on the downstream side
protects the media.
HEPA DIFFUSER DATA SHEET | |||||||
Filter size | Box size (top blow) | Box size (side blow) | Rated air flow | Size of round interface | Size of square interface | Filter resistance | |
L*W*H(mm) | L*W*H(mm) | L*W*H(mm) | m³/h | mm | mm | H13 (Pa) | H14 (Pa) |
340*340*70 | 410*410*280 | 410*410*450 | 500 | 250 | 200*200 | 280 | 300 |
340*340*90 | 410*410*300 | 410*410*450 | 250 | 270 | |||
484*484*70 | 554*554*280 | 554*554*450 | 1000 | 300 | 300*200 | 280 | 300 |
484*484*90 | 554*554*300 | 554*554*450 | 250 | 270 | |||
610*610*70 | 680*680*280 | 680*680*450 | 1500 | 350 | 400*200 | 280 | 300 |
610*610*90 | 680*680*300 | 680*680*450 | 250 | 270 | |||
870*570*70 | 940*640*280 | 940*640*450 | 2000 | 350 | 500*200 | 249 | 280 |
870*570*90 | 940*640*300 | 940*640*450 | 220 | 250 | |||
1170*570*70 | 1240*640*280 | 1240*640*450 | 2500 | ø300*2units ø450*1unit | 630*200 | 249 | 280 |
1170*570*90 | 1240*640*300 | 1240*640*450 | 220 | 250 | |||
1260*610*70 | 1290*640*280 | 1290*680*450 | 3000 | ø300*2units ø450*1unit | 630*250 | 249 | 280 |
1260*610*90 | 1290*640*300 | 1290*680*450 | 220 | 250 | |||
Note:SIDE BLOW ONLY MATCH SQUARE INTERFACE | |||||||
Filter resistance common difference is ±10% |