

Add to Cart
Green Deutsch 9 Pin J1939 Male to 16 Pin J1962 OBD OBD-II Male CAN
Bus Cable
Specification
9-Pin J1939 male connector | equivalent of Deutsch HD10-9-1939P-P080 |
Color of 9-Pin J1939 male plug | Green |
Type of 9-Pin J1939 male plug | Type 2 |
Pin assignment or pin out | customized |
Material of 9-Pin J1939 male plug | PA66 + glass fiber |
Material of OBD2 male plug | PA66 |
Wire | 20AWG, pure copper |
Cable length | customized |
Pins or terminals | copper, nickel-plated or gold-plated |
Insulation Resistance | 5M ohm min. |
Contact Resistance | 3 ohm max. |
Working Temperature | −25℃ ~ +85℃ |
Testing Voltage | DC300V 5M ohm/10ms |
Testing | 100% open, short and mis-wire testing |
Warranty | 1 year |
The end of Deutsch 9-Pin J1939 male connector can be overmolded or
not, according to your needs. If the ends are overmolded, the
cables are more sturdy and durable. If not overmolded, the price
can be lower because the raw material and labour cost is saved.
The Deutsch 9 Pin male connector of this cable is Type 2, so its Pin F is with smalller diameter as Pin C and Pin J.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this
(4 pins connected):
OBD2 male | Signal | 9-Pin J1939 male |
4 or 5 | Ground | A |
16 | Battery | B |
6 | J1939, CAN-H | C |
14 | J1939, CAN-L | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins connected):
OBD2 male | Signal | 9-Pin J1939 male |
4 or 5 | Ground | A |
16 | Battery | B |
6 | J1939, CAN-H | C |
14 | J1939, CAN-L | D |
2 | J1708-H | F |
10 | J1708-L | G |
The pin assignment or pin out can also be customized according to
your needs. If there is no need for more pins to be connected, we suggest we
just connect the necessary pins you need. If more pins are
connected, the price of the cable will be higher because the raw
material and labour cost will be higher.
Application
This cable will connect the 8 or 9 Pin type 2 devices such as ELDs
(Electronic Logging Devices) to the 16 Pin OBD2 style diagnostic
port found on Volvo and Mack trucks post 2013 that have the OBD-II
16 pin port in dash.
If you have a device that is designed to plug into the round Green
9 pin diagnostics ports on heavy trucks, this cable will work for
you to connect that device to 16 pin OBD2 type connector found in
2013 and newer Volvo and Mack trucks.
You can connect 16 pin OBD2 male plug of this cable into your
truck's 16 pin diagnostics port. The green 9 pin on other end will
then accept some ELDs that have the round 8 OR 9 position plugs.
This adapter cable also allows a J1939 Scan Tool (a scanner
designed to plug into the round J1939 9-pin Deutch connector on a
vehicle) to be used with a J1939 equipped vehicle that uses a
standard OBD2 style connector.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel free
to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)