The two-component glue applicator is composed of A and B glue
pumps, pneumatic system, lifting mechanism, frame, etc. Now we
could introduced those parts of sealants sealing machine as follows:
1. Glue pump:
(1) A glue pump is set for each of components A and B, which are
driven by their respective air motors to make a reciprocating
motion to suck in and push out the glue. The glue pumps A and B are
fixed together with the pressure glue plate, and then connected
with the frame to form their systems.
(2) The ratio of A and B components is adjusted by a proportional
lever: inward adjustment, B glue output decreases, outward
adjustment, B glue output increases. By adjusting the proportional
lever to control the amount of glue B, to control the ratio of A
and B glue.
(3) Glue output: controlled by the air source processor,
counterclockwise adjustment, the glue output increases, and
clockwise adjusts the glue output to decrease. (Here refers to the
total amount of glue) The glue pump adjusts the ratio of the glue
amount of A and B through a proportional lever, which has the
characteristics of flexible operation, stable performance, and
large adjustment range.
2. Lifting mechanism: A and B component rubber pumps are respectively equipped with a
set of the pneumatic lifting mechanism, which is composed of two
cylinders in parallel, and the respective pump bodies are fixedly
connected by a beam. One of the purposes is to apply the force of
the two cylinders to the rubber surface through the pressure plate,
and the pressure is adjusted by the supplier of the pressure
regulating valve, generally adjusted to about 0.3MPa; second, when
the rubber barrel needs to be replaced, The cylinder can lift the
pressure plate. Leave the plastic bucket so that it can be replaced
with a new one.
