

Add to Cart
Customization Glass Cantilever Crane with four lifting suckers 1000KG LJXJ1000
Main Features
It can select DC chaging vacuum pump,equipped with battery device.
-Maximum bearing capacity is 1000kgs (10 vacuum cups), Max. Glass
size can reach to 8m (The lifter with post can reach 3.9 meter)
-suitable for high-temperature glass
Glass Cantilever Crane with lifting sucker
1. This vacuum glass lifter is for handling insulating glass sheet.
2. This glass lifter is able to lift the glass sheet with 1000kg
3. It is equip with 5 suckers. But the sucker can be add according
to need of the client.
4. The equipment is Stable, Easy to use and safe.
5. The vacuum lifter is equipped with a warning light in case of a
power failure or vacuum leakage, an optical and an acoustic signal
goes off immediately to warn the operator to do emergency
operation.
Parameters:
Max Glass weight | 800KG | |
Rotation angle | Rotate 180 | Left and Right Up and Down |
Suction cups | 4 Pieces | |
Cup Materials | Silicone | |
Sliding method | Manual | |
Column height | 4 meters | Gas storage function |
Arm length | 4 meters | |
Air Control parts | Airtac |
Useing For
- Insulating Glass Production line,
- Installing Glass Curtain Wall System,
- Loading and Unloading glass sheet on glass cutting table,
- Instaling car windscreen.
Smart Vertical Edge Deleting Machine LJCM2545
Main feature
• Two-way glass access
• Automatically measure size
• Automatically distinguish low-e surface
• Edge deletion is adjustable
• The head can be rotated 360°
• Safe and full automatic device
• PLC control system, touch screen interface
• Six servos control system
• Intelligent control system, can recognize batch processing
Technical data
Max. glass processing size | 2500*4500mm |
Min. glass processing size | 400*280mm |
Glass thickness | 3-15mm |
Diameter of grinding wheel | 200mm |
Conveyor height | 500mm |
Edge deleting width | 10-50mm |
Transmission speed | 1. 29m/min |
Edge deleting speed | 2-29m/min |
Abrasive wheel width | 10/12/15mm |
Glass thickness | 3 - 15mm |
Grinding wheel speed | 0~3000r/min |
Total air consumption | 100L/ min |
Air pressure | ≥0.8MPa |
Total power | 3P 380V 50Hz 3.35KW |
Dimension | Dimensions :9700*2500*3400mm |
Total weight | 3700KG |
Electrical parameters
NAME | ORIGIN | BRAND |
Servo motor | Taiwan | TAIDA |
PLC | Taiwan | TAIDA |
Pneumatic component | Taiwan | AAIRTAC |
Low pressure electricity | Germany | SIEMENS |
Circuit breaker | Germany | SIEMENS |
Sensor switch | Korea | AUTONICS |
Approach switch | Korea | AUTONICS |
Limit switch | Taiwan | TEND |
Connector | Germany | SIEMENS |
Frequency converter | France | SCHNEIDER |
Main Button | France | SCHNEIDER |
Intermediate relay | Japan | OMRON |