IEC60598 SUS304 IPX3 IPX4 Spray Nozzle Tester 150L For LED Luminaires

Brand Name:PEGO GROUP
Certification:Third-Lab Calibration Certificate
Model Number:IPX34AS
Minimum Order Quantity:1 set
Delivery Time:15 working days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Yichun Jiangxi China
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Supplier`s last login times: within 34 hours
Product Details Company Profile
Product Details

IEC60529 IPX3 and IPX4 Spray Nozzle Test Equipment for Outdoor LED Luminaires


1. Introduction

IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The equipment is consisted by spray nozzle, water tank and control box. This equipment is to simulate the raining conditions to check the physical performance of outdoor luminaires, household appliance, auto parts and etc.


2. Features

● For IPX3 and IPX4 tests.

● The spray nozzle is processed by CNC technology, the head is made of pure brass, and the surface is mirror-polished. The moving shield is made of aluminum, and the other parts are made of SUS304 stainless steel.

● The surface of the nozzle head is sprayed with an anti-rust coating, which can effectively prevent the watermark on the surface of the nozzle from producing patina and affecting the appearance.

● The spray nozzle has 121 holes with diameter 0.5mm (1 hole at center, 1 inner circles of 12 holes at 300 pitch, 4 outer circles of 24 holes at 150pitch), completely meet the requirement of IEC60529.

● The control box includes timer, power switch button, emergency stop button, start button and flowmeter.


3. Specification

Outer size (L*W*H)

870mm*600mm*950mm (control box)

370mm*115mm*165mm (spray nozzle)

Spray nozzle diameter102mm
Number of holes121
Hole diameterΦ0.5mm
Holes position

1 hole at center

1 inner circles of 12 holes at 300 pitch

4 outer circles of 24 holes at 150pitch

Outer diameter of water inletΦ16mm
Outer diameter of water pipeΦ28mm
Flow rate10L/min±5%
Flowmeter adjustment methodManual adjustment
Water pressure range50-150Kpa
Flowmeter displayGlass flow meter
Capacity of water tank150L
Water source

1). The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2). The faucet is not more than 2 meters away from the equipment

Requirement for the siteThe ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set

4. Picture

China IEC60598 SUS304 IPX3 IPX4 Spray Nozzle Tester 150L For LED Luminaires supplier

IEC60598 SUS304 IPX3 IPX4 Spray Nozzle Tester 150L For LED Luminaires

Inquiry Cart 0