Add to Cart
Teeth and Watch Digital Ultrasonic Machine 3.2L small bath for Home
Tableware.
Product composition
Now our products are composed of household ultrasonic
cleaner,mutifunctional aweep ultrasonic cleaner,power adjustable
ulltrasonic cleaners,smart dual-bands ultrasonic cleaner,dihital
ultrasonic cleaner,mechanical ultrasonic cleaner,industrial
ultrasonic cleaner,submersible ultrasonic transducer etc.All of our
standard products have achieverd most internation standards,such as
CE certification,ROHS certification,FCC certification
etc.Besides,Dekang also have strict extramining procedurer for
controlling the quality of non-standard products.
About an order :
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
Product detail
As you can see from below picture,This machine is make up of seven
button which include degass,heating and timing.Basket are free ,and
you can see that the details are perfect.
Panel's details shows as below:
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.Like Deture,teeth, glass,ect.
Specification
Model: | DK-300D |
Tank Size(mm): | 240*140*100 |
Overall Size(mm): | 270*170*240 |
Capacity: | 3.2L |
Frequency(KHz): | 28 or 40 |
Ultrasonic Power(W): | 120 |
Heating Capacity(W): | 100 |
Timing Range(min:secs): | 1~99 |
Temperature Range(℃) | 0~80 |
Water Drainage | Yes |
Plug
Havemany kind of plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK PLUGE .
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.So
you could trust us,we will do our best for you!Also we could make
the certification of your country.
How to set time and Temperature.
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.