4 Pole Rcbo Circuit Breaker MCB + RCD AC or A Type Residual Current Operated
Brand Name:SONTUNE
Certification:CE, CB, SAA,ISO9001
Model Number:STRO7-63
Minimum Order Quantity:1000PCS
Delivery Time:25DAYS
Place of Origin:China
Contact Now
Add to Cart
Site Member
Location:
Wenzhou Zhejiang China
Address:
No. 3999 LiuJiang Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
4 Pole Rcbo Circuit Breaker MCB + RCD AC or A Type Residual Current Operated Circuit Breaker
STRO7-63 Series Residual current Circuit Breaker
STRO7-63 series high breaking capacity Residual current Circuit Breaker with over current protection is used in AC50/60Hz, rated voltage of 230V
2, 4 poles 400V, rated current to 63A for overload and short-circuit protection and Leakage current protection as well as for unfrequented switching under normal case.It is used extensively for industry, commercial and household.This product conform to IEC61009 standard.
General
1. Application:For protecting cables and equipments against
overload and short circuit.
2. General rules for choosing RCBO
- Technical data of the network at the point considered
The earthing systems,short-circuit current at the circuit breaker installation point,which must always be less than the breaking capacity of this device,network normal voltage.
- There are 3 curvve characteristics for magnetic operation:
B curve (3-5In) protection and control of the circuits against
length cables in TN and IT systems.
C curve (5-10In) protection and control of the circuits against
overloads and short-circuits; protection for resistive and
inductive loads with low inrush current.
D curve (10-14In) protection and control of the circuits against
overloads and short-circuits; protection for circuits which supply
loads with high inrush current at the circuit closing (LV/LV
transformers,breakdown lamps.)
| Model | STRO7-63 RCBO A or AC model |
| Standard | IEC61009 |
| Pole | 2P, 4P |
| Rated Short-circuit capacity(Icn) | 3KA,4.5KA,6KA |
| Rated Current(In) | 16,20,25,32,40,50,63A (10,30,100,300,500mA) |
| Rated Voltage(Un) | AC230(240)/400(415)V |
| Rated Frequency | 50/60HZ |
| Tripping curve | B,C,D |
| Magnetic releases | B curve: between 3and 5 In |
| C curve: between 5and 10In | |
| D curve: between 10 and 14In | |
| Electro-mechanical endurance | over 6000 cycles |
| Standard | IEC/EN 61009 | ||
| Electrical features | Rated current In | A | 16,20,25,32,40,50,63A ; 10,30,100,300,500mA |
| Poles | P | 2, 4 | |
| Rated voltage Ue | V | AC 240/415 | |
| Insulation voltage Ui | V | 500 | |
| Rated frequency | Hz | 50/60 | |
| Rated breaking capacity | A | 4500 ; 6000 | |
| Rated impulse withstand voltage(1.2/50)Uimp | V | 4000 | |
| Dielectric test voltage at ind.Freq.for 1 min | Kv | 2 | |
| Pollution degree | 2 | ||
| Thermo-magnetic release characteristic | B,C,D | ||
| Mechanical features | Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Protection degree | IP20 | ||
| Reference temperature for setting of thermal element | ℃ | 30 | |
| Ambient temperature (with daily average ≤35℃) | ℃ | -5~+40(Special application please refer to temperature compensation correction) | |
| Storage temperature | ℃ | -25~+70 | |
| Installation | Terminal connection type | Cable/Pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Therminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2 | |
| In-lbs | 18 | ||
| Mounting | on DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom |
4 Pole Rcbo Circuit Breaker MCB + RCD AC or A Type Residual Current Operated
Inquiry Cart
0