Product Details
ASTM F1566-2009 Mattress Ester With Rolling , Hardness , Edge
Testing Function
1. Introduction:
This set of equipment according to specifications QB /
T1952.2-2011, GB / T 26706-2011, BS_EN1957,, ASTM F1566-2009,
compact modular test machine can be used for fatigue endurance
testing mattresses, springs and bedside unit sex, and the
installation of a pad surface height measuring device and the
mattress firmness test device that can measure the pad surface
height, hardness, hardness levels.
Our research and development of integrated mattress tester can
freely input parameters, perform different test procedures,
graphical depiction of measured values, evaluate and record
measurements. When the cycle reaches a predetermined number of
times or when an emergency situation, the system will automatically
stop the test.
The machine uses a thickness of 10mm square steel plate and steel
as the machine body frame, the machine size about 3000 × 2350 ×
2810mm (L × W × H)
2.Specifications:
Applications | Meet the standards QB / T1952.2-2011, GB / T 26706-2011,
BS_EN1957-2000, ASTM F1566-2009 can be used for mass production of
automatic detection, furniture development and quality control. |
Test specimens | Mattresses, spring, the maximum size of 2.0m * 2.0m * 0.5m |
Pavement fatigue | Round drum Payload: 1400 ± 7 N Test itinerary: mattresses around the middle of each 250mm Cycles: 0 ~ 999,999 times Test speed: 16 ± 2 beats / min Hexagonal drum Length: 36 ± 3in (915 ± 75mm) Weight: 240 ± 10Lb (109 ± 4.5kg) Edge distance: 17 ± 1in (430 ± 25mm) Test speed: 0-20 times / min Test stroke: 0 ~ 1000mm adjustable (mattress width of 70% or 38in
(965mm), whichever is smaller in value) |
Measurement System |
Power System: Panasonic servo motor + gapless ball screw TBI Taiwan Load cell measuring range 0 ~ 200kg Displacement sensor measurement accuracy <0.1mm Test Range Maximum 500 mm Test speed 0.1 ~ 300 mm / min Dwell time: 0 ~ 99S |
Edge fatigue
|
Maximum stroke: 500mm (Cylinder: AirTAC) Force value Capacity: 2000N Holding pressure time: 0 ~ 99s |
Test Procedure
|
Test procedures can be customized by the PLC + color touch screen
control system and computer software control system. |
Testing Machine Size | Installation size 3000 × 2350 × 2810mm (L × W × H) |
Weight | About 1300kg |
Power | 220V/50Hz |
Download Brief:
ZL-2017 Mattress Three Comprehensive Testing Machi...
Company Profile
We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located
in Dongguan, Guangdong, China. It is a collection development,
research, production and sales of test equipment technology
company.
Companies with technical support, marketoriented, fundamental
human. Have a high level of professionalism, experience and
innovative research team and carved small peck production team.
Companies with the most advanced technology, the most stable
quality, best price, best after sales service, from installation
and commissioning, professional training, to solve practical
problems of customers, providing 24-hour technical advice.
company's products among consumers enjoy higher status, with many
agents to establish a long-term stable cooperative relations.
Our products are widely used in rubber and plastics industry,
Paper/carton/paperboard industry, Cable and enamelled wire
industry, Textile/Fabric industry, Shoes /Leather industry, Food
industry and other many indstry. At the same time, are applicable
to all scientific research units, quality inspection institutions
and academic fields. Our products meet UL, ASTM, JIS, GB, ISO,
TAPPI, EN, DIN, BS and other domestic and international standards.
Provide our customers with better overall solution laboratory,
including laboratory design, planning, renovation and equipment
selection, installation, training, maintenance, Comparative testing
management system, such as one-stop authentication technology
services.
Promises: Two year free maintenance of all equipment, maintenance
of life, welcome to consult the discussion!
