150 Ton Lab Small Silicone Mold Machine Rubber Vulcan Hot Press For Phone Case

Hydraulic system and principle:

After pressing the start button, the motor drives the oil pump to rotate (the direction of rotation of the pump should be consistent with the direction of the arrow), the oil filter→gear pump→overflow valve→check valve→cylinder works, and the hydraulic oil passes through the column oil filter→gear pump →Remote pressure regulating valve→One-way valve→The cylinder plug rises rapidly and the flow is reduced. The pressure of the low pressure relief valve and the remote pressure relief valve overflow system is displayed by the black needle of the electric contact pressure gauge, and the red needle of the electric contact pressure gauge is adjusted to The holding pressure is 16Mpa, and the other green needle is adjusted to 16Mpa. When the black needle and the red needle on the watch coincide, the pressure gauge sends a signal to stop the motor, which is the holding pressure. (Note: The vulcanization time and the number of venting times need to be pre-adjusted to 1-999). When the holding pressure time is up, the mold will be automatically lowered, and the hot plate will drop quickly, and the mold will be opened. A working procedure is thus completed. As the pressure drop may occur during mold clamping and vulcanization, the black needle retreats to coincide with the green needle (no pressure is maintained). At this time, the motor restarts to make the black needle coincide with the red needle again, that is, automatic pressure compensation and automatic compensation. Pressure does not affect the curing time.

Parameters:

About us
We are Zhongli Instrument Technology Co., Ltd, an instrument Expert, Headquartered in Dongguan, Guangdong, China.since 2007, specialized in manufacturing Lab testing equipments.

Throughout its more than 14 years of history, Our products have sold well in the Europe, America and Southeast Asia market and total more than 95 countries these years,especially favored by European and American countries.

In addition to standard machines, our R&D team can customize it for you. Just tell us your needs and we will make you satisfied.

Advantage Service:

1. We have R&D, designing department which can not only provide technological machines but also can satisfy special customized needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base, equipped with 120 technicians, we are capable to take large budget project.

Technical Support:

1. SUS Stainless plate is cut by advanced leaser machine which can ensure accuracy; All machine appearance is anti-rust electrostatic painting;
2. Imported electronic components: ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips and imported compressor:BOEK/TECUMSEH, which can keep the machine’s service life over 10 years.