Product Details
Wet Proof Anti Interference High Frequency Spark Tester , Cable
Testing Device
Specifications:
Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency:
2.5-3.5KHz normal. Fast recovery time after fault (0.1s)
The Sine Wave Spark Tester is a fast and reliable instrument used
in distinguish wire faults and detecting bare wires. Its high-speed
fault detection feature gives you prompt information without
worsening the condition of the wire after the test.
The use of high frequency (3KHz) enables a traditional commercial
power frequency bead chain electrode to be shortened to 120mm
HS015E Model.
The Sine Wave Spark Tester is quality-assured to meet your needs.
Basic Function
- Fast recovery time after fault (0.1 second).
- Occupies short space in line and with improvement factor of 50
compared to
- traditional CT power frequency electrode.
- Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/-
1% of reading
- Output Control: Front Panel Reset in Manual Mode. Closure time is
selectable
- 0.2s/2s/5s in main board by jumper JP, Form C relay contacts
(250VAC/5A) for all
- wire faults detected.
- Limits the fault current without damaging the test equipment.
- Short exposure time to corona does not degrade nor damage good
insulation.
- Distinguishes all wire faults and detects bare wire.
- Safety Switch interlock.
Basic Specification:
Specification | ZL-1007 High Frequency Spark Tester For Cable |
Output Voltage | 0.0~15.0KV R.M.S. |
Test Voltage | 1.0~15.0KV R.M.S. |
Cable Diameter | 0~25mm |
Maximum Load Current | 4mA Resistive,40mA Capacitive |
Output Frequency | 2.5-3.5KHznormal |
Electrode lengths | Bead Chain 120mm |
Fault Indication | Indicating lamp,Counting by Digital Counter |
Output Control | 1 Form C relay Contacts(220VAC/5A)for all wire faults and bare wire
faults detected |
Input Control | SP1, SP2 input interlock control |
Operating Model | Extruder Continuous Application |
Power Source | 175~264 Volts, 180VA, Single phase, 50/60 Hz |
Operation Temperature | +4~45°C |
Operation Humidity | <90%RH |
Signal Cable Lengths | 5M |
Weight | Control Unit =5 kgs, Electrode = 8.5 kgs |
Dimension Controller | 360(L)x485(W)x90(H) mm |
Gauge Head | 330(L)x200(W)x390(H) |
Line Speed | 2000 M/min. maximum* |
*Follow UL 44, any point on the wire being traveled for not less
than a total of 18 positive or negative crests of the supplied
voltage.
Company Profile
We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located
in Dongguan, Guangdong, China. It is a collection development,
research, production and sales of test equipment technology
company.
Companies with technical support, marketoriented, fundamental
human. Have a high level of professionalism, experience and
innovative research team and carved small peck production team.
Companies with the most advanced technology, the most stable
quality, best price, best after sales service, from installation
and commissioning, professional training, to solve practical
problems of customers, providing 24-hour technical advice.
company's products among consumers enjoy higher status, with many
agents to establish a long-term stable cooperative relations.
Our products are widely used in rubber and plastics industry,
Paper/carton/paperboard industry, Cable and enamelled wire
industry, Textile/Fabric industry, Shoes /Leather industry, Food
industry and other many indstry. At the same time, are applicable
to all scientific research units, quality inspection institutions
and academic fields. Our products meet UL, ASTM, JIS, GB, ISO,
TAPPI, EN, DIN, BS and other domestic and international standards.
Provide our customers with better overall solution laboratory,
including laboratory design, planning, renovation and equipment
selection, installation, training, maintenance, Comparative testing
management system, such as one-stop authentication technology
services.
Promises: Two year free maintenance of all equipment, maintenance
of life, welcome to consult the discussion!
