Home /Inverters & Converters /

Two DC Output Wind Turbine MPPT Charge Controller For Monitoring System

Two DC Output Wind Turbine MPPT Charge Controller For Monitoring System

Brand Name:Yo Power Electrical
Certification:CE, ROHS, FCC
Model Number:YQHLM series
Minimum Order Quantity:20units
Delivery Time:Within 3 days for 1~10 units
Payment Terms:L/C, D/A, Western Union, T/T, MoneyGram, Paypal
Contact Now

Add to Cart

Active Member
Location: Hefei Anhui China
Address: Room 4022-4026, R&D Center, 2700st Chuangxin Avenue, High-tech Zone, Hefei City, Anhui Province, P. R of China.
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

OEM 48V 400W ~ 600W MPPT Wind Solar Hybrid Charge Controller For Monitoring

This 400W~600W MPPT wind solar hybrid charge controller is designed for small off grid wind solar hybrid generation system, it also can work for independent wind generation system. Very suitable for streetlight system and monitoring system. With two DC output, it suitable to work for streetlight&monitoring system integrated.

1. Features

1.1 Basic Functions

  • Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization

There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power

  • Protect wind generator from over-revolution speed, over-voltage and over-current

Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator

  • Intelligent limiting of batteries max current

Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected

  • Function of manual brake
  • Wind charging manual switch
  • Solar charging manual switch
  • TWO DC output, each one has nine output control modes
  • DC output manual switch
  • Boost&buck function in one

1.2 Optional Function

  • USB function
  • RS232 interface
  • RS485 interface
  • Anemometer function

2. Parameters

Model

YQHLM04-02/48

YQHLM05-02/48

YQHLM06-02/48

Rated system voltage48V
Rated wind generator power400W500W600W
Rated solar panel power200W
Max. input voltage of solar panel160V
Battery low voltage disconnect40.8V
Battery low voltage reconnect46V
Equalize charging voltage58.8V
Equalize charging recovery voltage52.8V
Float charging voltage54V
Over load voltage68V
Over load recovery voltage60V
Wind dumpload rotate speed500R
Wind pole logarithm10D
Wind starting charging voltage20V
Wind dumpload voltage100V
Rated output current10A
1st output working modelPV control (light on: 6V, light off: 6V) (Adjustable)
2nd output working modelPV control on, full power working for 5hrs, light control off (adjustable)
Dump load control model

Over rotate speed limiting, over voltage limiting, Over current limiting, PWM

Wind charging technologyMPPT (Boost&Buck)
Solar charging technologyPWM
DisplayLCD
Display content

Battery: voltage, charging current, battery power
Wind: voltage, charging current, rotate speed, output current&power
Solar: voltage, charging current
System: status, generation power, error code

Ambient temperature-20℃~55
Humidity35~85%, non-condensing
Standy by consumption≤3W
Protection type

Battery: over-discharge, over-charge, anti-reverse connection
Wind: Over rotate speed, over voltage, over current

Controller size203*152*97.4mm
N.W2.1KG
Packing size290*170*190mm
G.W2.5KG
Optional functionRS232, RS485, USB, Anemometer
Warranty2 years
  • Remark 1: The parameters are marked in Red color can be adjusted by users according to different requirement of different battery
  • Remark 2: This 400W~600W MPPT wind solar hybrid charge controller suitable to small power system, especially streetlight and monitoring system, if you have wind generator and solar panel different from the power listed, please feel free to contact us for right model.


3. Application
Off grid wind solar hybrid system
Streetlight system
Monitoring system

China Two DC Output Wind Turbine MPPT Charge Controller For Monitoring System supplier

Two DC Output Wind Turbine MPPT Charge Controller For Monitoring System

Inquiry Cart 0