Arterial Network Balloon Spray Ultrasonic Precision Gathering Type Coating

Brand Name:FUNSONIC
Certification:CE
Model Number:FS1005
Minimum Order Quantity:1 UNIT
Payment Terms:T/T,Western Union
Place of Origin:CHINA
Contact Now

Add to Cart

Verified Supplier
Location: Hangzhou Zhejiang China
Address: No. 196 Shitashang Qiufeng Village, Fuchun Subdistrict, Fuyang District, Hangzhou City, Zhejiang Province, China. 311400
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

Arterial Network Balloon Spray Ultrasonic Precision Gathering Type Coating



Description:


Arterial balloon angioplasty, which involves implanting stents into arteries, is a widely accepted technique in the treatment of arterial diseases. In order to prevent the stent from being attacked by the human immune system and causing arterial occlusion again, the surface of the stent needs to be sprayed. The balloon catheter spray developed by FUNSONIC uses both line spray and convergent atomizing nozzles, which can generate extremely low flow rates, precise spray shapes, low-speed delivery, and relatively small droplets. By placing the balloon catheter on the spindle connected to the rotating shaft, and installing the nozzle above the balloon catheter. The axis can not only rotate but also translate, allowing the balloon catheter to be fully sprayed.



Parameters:


Product Type

Laboratory desktop

FS620

Pilot type vertical

FS650

Online production type

FS680

FS1005
Spray nozzle operating frequency20-200KHz100KHz (120KHz或150KHz for select)
Nozzle power10-100W2~ 10W
Continuous spraying volume max20-1200ml/h/pcs,Scalable0.01-l/min
Effective spraying width2-260mm/pcs,Scalable1-5mm
Spray uniformity<5%<5%
Solution conversion rate≥95%≥95%
Dry film thickness20nm-100μm20nm-1μm
Solution viscosity≤50cps≤10cps
temperature range1-60℃1-60℃
Atomized particles (median value)10-45μm (Distilled water), determined by the frequency of the nozzle10-25μm(Distilled water), determined by the frequency of the nozzle
Diversion pressure max≤0.15MPA≤0.05MPa
input voltage220V±10%/50-60Hz220V±10%/50-60Hz



Production Process:


1. Cleaning and preparation: Clean the balloon catheter before spraying to ensure that the surface is free of contamination.
2. Spraying process: Spraying is carried out in a controlled environment to reduce the impact of external factors on the quality of the coating.
3. Curing and testing: After spraying, perform curing treatment and necessary performance testing.



Arterial Network Balloon Spray Ultrasonic Precision Gathering Type Coating




China Arterial Network Balloon Spray Ultrasonic Precision Gathering Type Coating supplier

Arterial Network Balloon Spray Ultrasonic Precision Gathering Type Coating

Inquiry Cart 0