New Developed Load Cell Control Unit Guide Rail Weighing/Force Measuring Control Module With CANBUS BST106-M60S(L)

New Developed Load Cell Control Unit Guide Rail Weighing/Force Measuring Control Module With CANBUS BST106-M60S(L)

BST106-M60S[L] Guide Rail Type

Weighing / Force Measuring Control Module

Weight/Force Display, Peak Value Detection / Display Holding,

Auto Weight-checking, Setpoint DO Output, AO/Digit Transmission

Main Features:

1. Applications: Weight/Force Display, Peak Value Detection&Display Holding, Auto Weight-checking, Setpoint DO Output and AO/Digit Transmission.

2. Max. Connection Quantity: 8 Loadcells (350Ω).

3. Zero Upon Power Up, Zero Auto-tracking, Manual/Auto Zero and Zero Calibration available.

4. Load Calibration, Data Calibration, Segmenting Span Correction and Segmenting Weight Calculation available.

5. Auto-locking, Key-locking, Key-unlocking, Digital Setting&Calibration and I/O Testing functions available.

6. 3 Definable normally open switch inputs [DI] and 3 definable normally open transistor switch outputs [DO].

7. 1 Optional&definable current signal output [AO: 0~20mA].

8. 1 Optional&definable voltage signal output [VO: 0~10V].

9. RS232, optional RS485 and CANBUS communication ports for connecting Host IPC/PLC and LED Remote Display.

Display

1. 6+6 Red LED digital tubes for English character and digit display.

2. Weight Display Range: -9,999~+99,999.

3. Scale Capacity: Setting Range 1~99,999.

4. Scale Division: Optional 1, 2, 5, 10, 20, 50, 100, 200, 500.

5. Display Resolution: 1/50,000.

6. Decimal Point Position: Optional 0, 0.0, 0.00, 0.000, 0.0000.

7. Display Refreshing Time: Setting Range 0.01~1.00s.

Keypad

1. 4-key English keypad for Menu&Shortcut mode operation.

Weighing Signal Interface

1. Excitation Voltage/Max. Current: DC5V/120mA [8-350Ω loadcells].

2. Signal Input Range: 0~12.5mV.

3. Output Sensitivity of Loadcell: 1.0~2.5mV/V.

4. 24-bit ∑-△ADC with internal resolution 1/1,000,000.

5. Optional Sampling Frequency: 3200Hz, 1600Hz, 800Hz, 400Hz, 200Hz, 5Hz.

6. Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.

7. Zero Drift: ±0.1μV/℃ RTI (Relative to Input).

8. Gain Drift: ±5ppm/℃.

9. Non-linearity: 0.005%FS.

Keypad Operation

User Interface Diagram

Installation

Terminal

Delivery

Changsha SUPMETER Technological Co., Ltd., as a council member of China Weighing Instrument Association (CWIA), is a high-tech enterprise which specializes in designing and manufacturing weighing/batching controller, force measuring controller, explosion-proof controller and related system software.

Since founded in 2004, SUPMETER is persisting in doing the same thing of ‘customizing satisfied products for you and building win-win cooperation with you’ and insisting on the core idea of ‘Being Super in Meter and Being Perfect in Service’. On the quality basic of ‘Accurate Weighing, Quick and Steady Control, Standard Communication Bus and Protocol, Suitable for Industrial Environment’, SUPMETER is doing the best to meet your individual requirements and to reach the enterprise goal of ‘Outstanding Quality, Continuous Improvement, Effective Service and Customer Satisfaction’.

The products of SUPMETER have been sold to over 1000 weighing equipment manufacturers from China, Germany, USA, Canada, Australia, Russia, Ukraine, Uzbekistan, Turkey, Pakistan, India, Thailand, Vietnam, Philippines, Malaysia, Indonesia, Singapore, Sri Lanka, South Africa, Nigeria, Zimbabwe, Iran, Saudi Arabia, Jordan, United Arab Emirates, Oman, Palestine, Mexico, Brazil, Argentina, Venezuela, Honduras, Bolivia, Chile, Peru and other countries and regions. And we have built long-time relationship of technical exchange and co-development with many famous enterprises. By tracking and applying international advanced technology and combining with all kinds of typical applications from the worldwide customers, SUPMETER has developed multiple high-quality products for customers and became a famous enterprise and brand in weighing, batching and force measuring field.

We will do our best to make our development more high-efficiency, quality more superior, service more enthusiastic and price more reasonable. SUPMETER, as your faithful team of product-development and technical service, is one of your best choices.

Executing Standard & Product Certification:

• GB/T 7724-2008《Electronic Weighing Meter》PRC National Standard.
• GB/T 7724-2008《Electronic Weighing Meter》PRC National Standard.
• OMIL R76: 2006《Non-automatic Weighing Instruments》International Recommendation.
• OMIL R50: 1997《Continuous Totalizing Automatic Weighing Instruments》.
• PRC Approval Certificate No. PA2006F108-43, PA2014F108-43.
• CE Certification No. CPC16/042377, CPC16/042376.