Two Channels CCT LED Controller RF , 2.4GHz RF Wireless Remote LED Controller

2 Channels CCT Touch Dimmer 2.4GHz RF Wireless LED Controller

SUMIRIZE:

DM9122 is the 2 channels product of 2.4GHz RF Wireless LED Dimmer Series. We also have other similar products with 1-4 channels for option. This 2 channels product is good at CCT dimming to adjust the color temperature. 2.4GHz is the best frequence to realize wireless LED lighting controlling which is under the limit of civilian wireless devices. It can reach Max 30 meters controlling distance in the open space. It can go cross normal obstacle and satisfy common use in LED lighting. Much more easy to install and operation, beautiful appearance and rich function, this products will be your best choice of LED wireless controller.

1), 2.4GHz high frequence control signal can ensure stable wireless remote control effect and anti-interference ablity.

2), The receiver can connect 2 channels output load. Each output interface can stand 6 Ampere current, Max output current load is 20 Ampere.

3), With touch control function, user can adjust the light CCT and brightness remotely.

4), Screw terminal of receiver and AAA battery of remote controller realize easy installation and more universal in in the world.

5), Grouping dimming function can satisfy much more circumstance as personal needs.
6), With independent control according to different groups, it can realize not only one to one controlling but also one to many and many to many controlling.
7), Many pre-instal models creat different color changing effect while changing speed is adjustable.

8), Custom-made is available and 3 years warranty.

Tech-parameters:

Specifications of LED RF Wireless Controller Series:

Function Instructions:

1), As shown,the button control mode is adopted.

2), First connect the load, then connect the power line, and power on at the last.

3), Confirm that there is no short-circuit between the connecting wires before power on.

4), Within 5 seconds after the receiver powered on, press any boot keys on the remote controller until the output lights are blinking, which respresents the receiver and the remote controller that have been successfully paired into one-to-one.

5), Within 5 seconds after the receiver powered on, continuously press the total boot button 6 times to clear the paired code.

Product Wiring Diagram:

Attentions of DM9122:

1. Please offer the receiver a input voltage of DC12-24V, not any other voltage.

2, There is no battery in the new remote controller, please instal a couple of standard AAA Battery before using.

3, Please correctly connect the line according to the wiring diagram.

4, This product must not be overloaded.

5, A single remote controller can control 4 groups receivers and each group can run no more than 4 receivers. Otherwise, there will be a signal attenuation.

6. The max 30 meters remote control distance was tested in open space. It may be shorter in narrow space or somewhere contain many obstacles.