Name: 30NM 4 Axis Hybrid Stepper Motor CNC Route Kit 2 Phase
Brand: Jkongmotor
Price: 1 USD

China Categories

Home Products Suppliers Selling leads

English

Home /Products /Machinery /Woodworking Machinery /Wood Router /

3.0NM 4 Axis Hybrid Stepper Motor CNC Route Kit 2 Phase

Brand Name:Jkongmotor

Certification:CE, ROHS,ISO9001

Model Number:JK57HS112-3004

Minimum Order Quantity:3-10pcs

Delivery Time:For samples , 7-25 days / For batch , 15-40days

Payment Terms:T/T , paypal , Western Union, L/C

Contact Now

Add to Cart

CHANGZHOU JKONGMOTOR CO.,LTD

Verified Supplier

Location: Changzhou Jiangsu China

Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162

Supplier`s last login times: within 26 hours

View Contact Details

Product Details Company Profile

Product Details

3 / 4 Axis Cnc Route Kit 3.0 Nm( 425oz.in) 3A Nema 23 Steper Motor With Driver

Step angle	1.8°
Temperature rise	below 80 ℃
Ambient temperature	-20 ℃ ~ + 50 ℃
Insulation resistance	minimum 100MΩ, 500VDC
Dielectric strength	500VAC for 1 minute
Shaft radial clearance	0.02 max (450 g load)
Shaft axial clearance	0.08Max. (450 g load)
Maximum radial force	75N (20mm from flange)
Maximum axial force	15N

The parameters of 57mm stepper motor:

Product Name: Nema23 stepper motor

Model: JK57HS112-3004

Number of Phase: 2

Step Angle: 1.8 Degree

No. of Leads: 4

Rated Voltage: 3.78V

Rated Current: 4.2 Amps

Holding Torque: 3N.m

Motor Diameter: 57mm

Motor length:112mm

Shaft Length: 21mm

Shaft Diameter: 8mm

Electrical Specification:

Model No.	Step Angle	Motor Length	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Detent Torque	Rotor Inertia	Mass
	( °)	(L)mm	A	Ω	mH	N.m	No.	g.cm	g.cm²	Kg
JK57HS41-1006	1.8	41	1	7.1	8	0.48	6	250	150	0.47
JK57HS41-2008	1.8	41	2	1.4	1.4	0.39	8	250	150	0.47
JK57HS41-2804	1.8	41	2.8	0.7	1.4	0.55	4	250	150	0.47
JK57HS51-1006	1.8	51	1	6.6	8.2	0.72	6	300	230	0.59
JK57HS51-2008	1.8	51	2	1.8	2.7	0.9	8	300	230	0.59
JK57HS51-2804	1.8	51	2.8	0.83	2.2	1.01	4	300	230	0.59
JK57HS56-2006	1.8	56	2	1.8	2.5	0.9	6	350	280	0.68
JK57HS56-2108	1.8	56	2.1	1.8	2.5	1	8	350	280	0.68
JK57HS56-2804	1.8	56	2.8	0.9	2.5	1.2	4	350	280	0.68
JK57HS64-2804	1.8	64	2.8	0.8	2.3	1	4	400	300	0.75
JK57HS76-2804	1.8	76	2.8	1.1	3.6	1.89	4	600	440	1.1
JK57HS76-3006	1.8	76	3	1	1.6	1.35	6	600	440	1.1
JK57HS76-3008	1.8	76	3	1	1.8	1.5	8	600	440	1.1
JK57HS82-3004	1.8	82	3	1.2	4	2.1	4	1000	600	1.2
JK57HS82-4008	1.8	82	4	0.8	1.8	2	8	1000	600	1.2
JK57HS82-4204	1.8	82	4.2	0.7	2.5	2.2	4	1000	600	1.2
JK57HS100-4204	1.8	100	4.2	0.75	3	3	4	1100	700	1.3
JK57HS112-3004	1.8	112	3	1.6	7.5	3	4	1200	800	1.4
JK57HS112-4204	1.8	112	4.2	0.9	3.8	3.1	4	1200	800	1.4

Suitable Power Supply Parameters:

Power Supply Model	Input voltage	Ouput voltage	Power	Weight	Size
S-120-24	AC100-240V	DC24V	120W	0.3kg	1299940mm
S-120-24	AC110V/220V	DC24V	120W	0.45kg	1999942mm
S-240-24	AC100-240V	DC24V	240W	0.48kg	1599942mm
S-240-24	AC110V/220V	DC24V	240W	0.6kg	20011050mm
S-480-24	AC110V/220V	DC24V	480W	0.75kg	21511550mm
S-200-36	AC110V/220V	DC36V	200W	0.48kg	1999942mm
S-360-36	AC110V/220V	DC36V	360W	0.7kg	21511550mm
S-720-36	AC110V/220V	DC36V	720W	1.35kg	24524565mm

Power Supply Features:

This series of products has strong versatility and can be applied
to various types of products such as lamps, monitoring, security,
communication equipment, etc.

You may receive:

1. 3 or 4 Pcs JK57HS112 (Nema 23 Hybrid Stepper Motor) + 1 / 2 / 3 / 4 Pcs Power Supply + 4 PCS JKDM542 Driver + other parts

Noted: If you need other motor combinations, please send inquiry to us or contact us directly.

No.	Output Voltage	Motor Quantity	Supply Quantity	Driver	Other
1	24V	4pcs stepper motor	1 / 2 / 3 / 4 PCS	4pcs —— JKDM542	board + cable + usb
2	36V	4pcs stepper motor	1 / 2 / 3 / 4 PCS	4pcs —— JKDM542	board + cable + usb

Motor Features:

1. Low heat (static, the current is almost zero, no heat).
2.Smoothing (based on the feedback vector space vector current
control algorithm and vector smoothing filtering technology, the
traditional stepping motor troubled low frequency resonance has a
very good resistance).
3. Applicable industry: dispenser / woodworking machine / welding
machine / screw machine / zipper machine / winding machine /
placement machine / packaging machine / engraving machine / laser
machine / LED / electronic equipment.
4. Large torque output in some cases can simplify the complexity of
the machine.

Application:

JKONGMOTOR’s stepper motors are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.

Motor Driver Parameters:

Features
Input voltage	18~60V DC
Output current	1.0A~4.2A(Peak)
Input Current	<4A
Humidity	Not condensation, no water droplets
Consumption	80W
Using environment	-10 ~ 45 ℃, avoid dust and corrosive gas
Storage environment	-40~+70℃

Motor Driver Features:

1,Average current control, 2-phase sinusoidal output current drive
2,8 channels output phase current setting
3,Offline command input terminal
4,High start speed
5,High hording torque under high speed
6,High performance, low price
7,Opto-isolated signal I/O
8,Overvoltage, under voltage, overcorrect, phase short circuit protection
9,15 channels subdivision and automatic idle-current reduction
10 ,Motor torque is related with speed, but not related with step/revolution

The connection between the driver and the two-phase hybrid stepping motor is four-wire. The motor windings are connected in parallel and in series, and the connection method is good. The high-speed performance is good, but the driver current is large (1.73 times the motor winding current). The drive current is equal to the motor winding current.

The characteristic of the output torque:

1) The larger the actual current of the motor, the greater the output torque, but the more copper loss (P=I²R) of the motor, the more heat the motor generates;
2) The higher the supply voltage of the driver, the higher the high-speed torque of the motor;
3) It can be seen from the moment frequency characteristic diagram of the stepping motor that the high speed is smaller than the medium and low speed torque.

Details of Nema23 3axis stepper motor:

Introdution of JKONGMOTOR:

Nema86 stepper motor Application:

FAQ:

Q: 1. Can you make the gearbox or gearmotor with custom specifications?
A: YES. We have strong R&D capability, also a great term of engineers, each of them have many work years experience.

Q: 2. Do you provide the samples?
A: YES. Our company can provide the samples to you

Q:3.Do you provide technology support?
A: YES. Our company have strong R&D capability, we can provide technology support if you need.

Q: 4. why should you buy from us not from other suppliers?
A: Professional one-to-one motor customized . The world's large enterprise of choice for high quality suppliers . ISO9001:2008 quality management system certification, through the CE, ROHS certification.

Q: 5. How to ship to us?
A: We will ship the samples to you according to the DHL or UPS or FEDEX etc account you provide.

Q: 6. How can I know the product is suitable for me?
A: Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

Company Profile

Company Profile:

CHANGZHOU JKONGMOTOR CO.,LTD (Changzhou Jingkong Motor&Electric Appliance Co.,Ltd)is an ISO9001 Professional manufacturer. Was established in 2011 year. We are a professional manufacturer in Changzhou city, China. Production Capacity exceeds more than 1 million motors per year. Our Company offers three major series of products: Hybrid Stepper motors, Brushless Dc motor and Dc Brush motor. We are always continues develop new type models.

We are also have several joint venture companies who specialized in the production of AC servo motor, PM stepper motors, Spindle motor and Motor drivers. We export our motors to more than 30 countries Such as United States, Germany, Russia, Turkey, Brazil and so on.

Jkongmotor sold to major manufacturing Companies for Industry of automation, medical and health care equipment, 3d printer machines, packing devices, Information Technology, household appliance products.

We have an Engineering team with many years of experience in application Engineering, design Engineering with the latest advances equipment. Our Engineering Staff provides the finest quality product with service after the product is delivered to our Customers.

Mission Of the Enterprise:
Let Customer Profit
Let Staff Prosperity,
Let Enterprise Development

Corporate Culture:
Customer First　　　Hardwork　　　Positive Energy
Responsibility　　　Executive Force　　　Integrity　　　　Gratefulness

Company Profile:

Changzhou Jkongmotor Co., Ltd was a high technology industry zone in changzhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome 'OEM' & 'ODM' cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a solid foundation for the strategic goal of realizing only really the sustainable development of the company.

Equipments Show: