JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver

Brand Name:Jkongmotor
Certification:CE, ROHS,ISO9001
Model Number:JKBLD750
Minimum Order Quantity:3-10pcs
Delivery Time:For samples , 7-15 days / For batch , 15-25days
Payment Terms:T/T , paypal , Western Union, L/C
Contact Now

Add to Cart

Verified Supplier
Location: Changzhou Jiangsu China
Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162
Supplier`s last login times: within 26 hours
Product Details Company Profile
Product Details

CNC Brushless DC Motor Driver JKBLD750 For 0W - 750W 1HP 3000RPM 48V BLDC Motor


Description:

The BLD750 BLDC motor drive is a high performance, cost-effective 3phase BLDC motor drive, which can provide power output Max 750VA.The design is based on advanced DSP technology and feature high torque, low noise, low vibration, PID speed loop, PID current loop, over current protection, over load protection and a combined use of manual speed adjustment and automatic speed adjustment.


Connection Definition:

MarkDefinition
DC+/DC-DC Power Input (DC24V~DC48V)
U,V,WMotor Lead Wire
Hu,Hv,HwHall Sensor Lead Wire
REF+Hall Sensor Power Supply +
REF-Hall Sensor Power Supply -
VCCExternal Potentiometer Power Supply ( Internal Power Supply Only)
SVExternal Potentiometer ( No Connection When Adjusting Speed With Internal Potentiometer ) or Pulse Rate In Note
COMCommon (Low Level/Ground)
F/RDirection: Low Level/CCW High Level or No Connection/CW Note
ENEnable: High Level/Stop Low Level/Run Note
BRKQuick Brake: High Level/Stop Low Level/Run Note
SPEEDSpeed Signal Output
ALARMAlarm Signal Output

Note①: Potentiometer/10KΩ or analog signal DC 0V~+5V (Change

internal switch J1/DC0-10V).Turn off the internal potentiometer RV

when using an external potentiometer to adjust the motor speed.

Note②:High level/5V (5mA)


Peak Power Output Setting:

Note: To protect the motor, set the arrow number as the same as the motor nominated power. Whenever overload occurs the drive will turn out to be the protection mode.


Connection:

Mechanical Drawings:

Speed Adjustment Instruction:


Motor Speed Adjusted By The Internal Potentiometer RV:

SW1/ Off (Factory setting)


Motor Speed Adjusted By Analog DC 0V~+5V Input:

SW1/ Off (Factory setting) set J1 (internal) as (user Setting) RV—Turn Off


Motor Speed Adjusted By Analog DC 0V~+10V Input:

SW1/ Off (Factory setting) set J1 (internal) as (user Setting) RV—Turn Off


Motor Speed Adjusted By Pulse Rate Input:

Pulse rate: 0K—3KHZ Speed linear modulation

Pulse amplitude: 5V Pulse duty ratio: 50%

SW1/ On (User setting) RV—Turn Off

J7 (Internal)/ Switch on with the jumper cap on J1 (User setting)


Motor Speed Quick Response Setting:

SW2/ On ( User setting): PID closed loop--quick speed response

SW2/Off (Factory setting): Open loop--Normal speed response


Motor Speed Signal Output:

Connecting SPEED and COM to get pulse output F=N*P/60

F—Pulse output frequency

P—Pole number of BLDC motor

Drive Alarm Output:

When drive alarm, it will break over with the port of COM and be low

level. The drive stop to work and alarm light run.

Lead Wire Connection: Take care of the sequence of U,V,W


Motor Parameter set by ICAN BLDD-01 (Optional) :


RS232 Communication Interface CP-in

The BLDD48-45A BLDC motor drive support RS232 communication Protocol to set motor run-up time, etc. When choose ICAN BLDD-01 as host controller, the operating process and instruction as below:


ICAN BLDD-01 Motor Setting Panel Operating Process:

Connect to CP-in (BLDD48-45A)

SW1/ Off (Factory setting) RV—Turn Off


BLDD-01 Parameter Setting Table:


Function codeModeSetting rangeUnitFactory settingAlteration
P000Control mode

00 BLDD-01 control

01 None host control

None Panel control
P001Panel setting speed0~Rated speedRPM
P002Run-up time0.1~9.9S0.2
P003Motor pole number setting1~99Pole pairs4
P004CW CCW

01 CW

00 CCW

01
P005Reserved
P006Reserved

BLDD-01 Panel Setting Process:

1. Turn on the power supply, press <Set> to stop the motor

2. Press <▲> or <▼> to choose the mode you need (Press Esc return and motor running)

3. Press <Set> enter into parameter mode (Press Esc return and motor running)

4. Press <> or <> to change the parameter (flashing)

5. Press <Set> to reserve, parameter stop to flash. Press <Esc> return and motor running.


Panel Protection Mode:

When the system running, panel nixie light shows Err×

Err0 represents Over-voltage or Over-temperature protection

Err1 represents Over-current protection

Err2 represents Hall sensor error protection


Motor Parameter set by other host controller:


BLDD48-45A Communication Protocol (RS232)


1. Communication Interface:

Asynchronous serial communication

Baud rate:2400

Start bit:1 bit

Stop bit:1 bit

Data bit:8 bits

Even/odd parity:none

Communication interface voltage:3.3V


2.Communication Protocol:


Function1:Motor speed controlled by drive BLD-750 itself

Communication format :“i”

Instruction:send a character


Function2:Motor speed controlled by host computer

Communication format:“o”

Instruction:send a character


Function3:Motor speed set by host computer

Communication format:“v”0X00,0X00

Instruction:send a character “v” then two hexadecimal numbers

the high 16bits,the low 16 bits


Function4:run-up time

Communication format:“y“ 0X00

Instruction:send “y“ then a hexadecimal number



China JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver supplier

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver

Inquiry Cart 0