Hastelloy C4 Alloy Forged Round Bar with Good Ductility and Corrosion Resistance

Introduction

Hastelloy C4 is a nickel-chromium-molybdenum alloy which has improved thermal stability. In this alloy, the tungsten was totally omitted and the iron content was reduced to approximately 1%. The alloy also contains approximately 0.3% Ti.

Density:8.64g/cm3

Character

Outstanding high-temperature stability; exhibits good ductility and corrosion resistance after long-time aging at 650 to 1040 °C (1200–1900 °F). Resists formation of grain-boundary precipitates in weld heat-affected zones, and is suitable for most chemical process applications in the as-welded condition. Has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to 1040 °C (1900 °F).

Hastelloy C4 has exceptional resistance to a variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine, and chlorine-contaminated media (organic and inorganic, dry chlorine, formic and acetic acids, acetic anhydride, seawater, and brine). The general corrosion resistance of Alloy C276 and Alloy C4 was essentially the same in many corrosive environments, except that in strongly reducing media like hydrochloric acid, Alloy C276 was better; but in highly oxidizing media, the opposite was true, that is, Alloy C4 was better. Alloy C4 offers good corrosion resistance to a wide variety of media including organic acids and acid chloride solutions. This alloy has found greater acceptance in European countries in contrast to Alloy C276, which is more widely used and accepted in the United States.

Application

It has been widely used in the field of chemical engineering and high temperature environment. Typical application areas:

• Flue gas desulfurization system
• Acid pickling and acid recycling plant
• Acetic acid and agricultural chemicals production
• Titanium dioxide production (chlorine method)
• Electrolytic plating

Chemical composition (%)

Cr=14.00~18.00, Mo=14.00~17.00, Fe≤3.00, C≤0.015, Si≤0.08, Co≤2.00, Mn≤1.00, P=≤0.04, S≤0.03, Ti≤0.07, Ni=Remainder

Suzhou Xunshi New Material Co., Ltd (refered as Xunshi afterwards) is a professional supplier of high performance alloys. Our factory is specialized in manufacturing Nickel alloys & Cobalt alloys for 10⁺ years，with a company mission to provide a high quality, reliable source for precision alloys, high temperature alloys and stainless steels in both pilot run and mass production. We are professionally manufacturing materials with unique features, which are then used in aerospace, military, electronics, marine, petroleum and petrochemical industries.

Base on “Quality-oriented, Leading Technology, Continuous Improvement, Customer Satisfaction”, we believe Xunshi could be your best supplier.

Product Scope of Xunshi

· Inconel

· Hastelloy

· Incoloy

· Monel

· Nimonic

· Nitronic

· Haynes

· Special Stainless Steel

· Soft Magnetic Alloy

· Permanent Magnetic Alloy

· Elastic Alloy

· Controlled Expansion Alloy

· Magnetostrictive Material

Services of Xunshi

· Material selection

· Non-standard product research and pre-production

· Hard to find material sourcing

· Cutting/splitting

· Precision machining

· Heat treatment

· Customized Packing

· Logistics service

Advantages of Xunshi

· Experienced in industry

· Quality control system

· Authorized Certificates

· Guaranteed delivery and quality

· Customers from 30+ countries trust us

Xunshi is engaged in introducing China-origin high performance alloys to the entire world. Choose Xunshi, choose high performance.