XLPE 4mm2 Twin Core DC Solar Cable For Solar Pv Tinned Copper 1800V Solar Installation
Certification:TUV/CE/CQC/ISO9001
Model Number:PV1-F 2x4mm2
Minimum Order Quantity:100m
Delivery Time:3-15days
Payment Terms:L/C, T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Ningbo Zhejiang China
Address:
No. 108, West Section of Yinxian Avenue, Haishu District, NINGBO, CHINA 315010
Supplier`s last login times:
within 41 hours
Product Details
Company Profile
Product Details
XLPE 4mm2 Twin Core Dc Cable For Solar Pv Tinned Copper 1800V solar installation
Construction:
- Dual wall insulation. Electron beam cross-linked
- Excellent resistance to U.V., water, oil, greases, oxygen,
ozone and general weathering - Excellent resistance to abrasion
- Excellent flexibility and stripping performance
- Halogen free, flame retardant, low toxicity
- High current carring capacity
- TUV approved
Cable made of electron-beam cross-linked insulation and coating; high resistance against heat , cold, oil, abrasion, ozone,UV and weather; with improved reaction in case of fire . low smoke, halogen free , flame free ,flame retardant; flexible, easy to strip, very low space requirement, extremely, extremely mechanically robust, very long lifetime.
| TYPE:TWIN CORE SOALR CABLE | PART NO:PV1-F 2X4mm2 | ||
| CONSTRUCTION: | |||
| CONDUCTOR | MATERIAL | Tinned copper | |
| CONSTRUCTION | 56/0.285mm | ||
| RESISTANCE | 5.09Ω/km (MAX. at 20℃) | ||
| INSULATION | MATERIAL | XLPE | |
| DIAMETER | 4.2±0.1 mm | ||
| THICKNESS | 0.6±0.10 mm | ||
| COLOUR | Black | ||
| JACKET | MATERIAL | XLPE | |
| DIAMETER | 12 X 5.5mm | ||
| THICKNESS | 0.6±0.10 mm | ||
| COLOUR | Black | ||
| Electrical Data | Rated Rating | AC 0.6/1KV DC1800V | |
| Rated temperature | -40 ～＋90,Dry and Wet | ||
| 60℃ rated current | 55A | ||
| Test voltage | 3.0KV AC | ||
| Weathering Resistance | Sun Res. | ||
| MARKING | (+) POLE NINGBO TÜV SÜD EN 50618:2014 H1Z2Z2-K 4mm2 1500 VDC - DO NOT DISCONNECT UNDER LOAD - 120℃ SOLAR PV DC CABLE (+) POLE 2019Q3 (-) POLE NINGBO TÜV SÜD EN 50618:2014 H1Z2Z2-K 4mm2 1500VDC - DO NOT DISCONNECT UNDER LOAD - 120℃ SOLAR PV DC CABLE (-) POLE 2019Q3 | ||
Application
These cables are designed for connecting photovoltaic system components inside and outside
of buildings and equipment with high mechanical requirements and extreme weather
conditions.
Standards
DIN EN 50618
Fire-resistance performance: IEC 60332-1
Low smoke emission : EN/IEC 61034-2
Halogen free according to EN 50525-1, Annex B
Low corrosivity of gases according to EN 50267-2-2, IEC 60754-2
Features:
1) Electron beam cross-linked materials do not melt or flow, even
at high temperature, high resistance against heat, cold,abrasion,
UV resistant, ozone and hydrolyses.
2) These cables provide the means to interconnect between
photovoltaic(PV) panels and from panels to the inverter.
3) They operate at DC voltage and provide long life in exposed
conditions.
| Name | PV Cable |
| The product description | Widely used in indoor and outdoor solar installations, electrical installation, indoor and outdoor, explosion-prone areas, factories, industrial and agricultural industries. |
| Product features | Low smoke without halogen, good cold, ultraviolet, ozone - resistant and weather - resistant. |
| Flame retardant, cutting resistance and penetration resistance. | |
| Cable protection level Ⅱ level. | |
| With 150 ℃ photovoltaic cable radiation as insulation materials, halogen free flame retardant is halogen-free, non-toxic modified polyethylene thin hengjing resin as the main raw material, add halogen-free, non-toxic, flame retardant, heat stabilizer, eliminate smoke agent, preservative, such as fertilizer, does not contain halogen, heavy metals, phosphorus. | |
| It conforms to ROHS, and the insulation resistance is small after immersion. | |
| Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km |
| 2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm | |
| 3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω. | |
| Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
| 18, 16 and 14, 12, 10, 8, 6, 4, 2 mm ^ 2 PV wire | |
| Insulation: > 0.5mm thick with low smoke and halogen material, and meet the specified limit of the customer. | |
| Sheath: low smoke and halogen free material thickness > 0.5mm. | |
| Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
| The highest temperature of conductor: 120 ℃ (allow 5 s in short circuit temperature 200 ℃) | |
| Limited voltage: AC0.6/1kv dc1.8kv. |
FAQ:
1. When can I get the quotation?
Within 24 hours of getting the inquiry, if you are very urgent to
get the price, please
call us to give complete specifications about the cable. price will be calculated soon.
2. How long about the delivery?
Usually within 3-4 working days after payment, mainly according to
the quantity.
3. What's your payment terms?
We accept T/T (bank transfer), L/C
4. Do you accept the customized order?
Yes, we do.
5. Do you offer OEM & ODM?
Yes. OEM & ODM are available.
Picture of 4mm² twin core DC cable
XLPE 4mm2 Twin Core DC Solar Cable For Solar Pv Tinned Copper 1800V Solar Installation
Inquiry Cart
0