PE Granules Vacuum Drying Machine , 800 Kilogram Dehumidified Air Dryer

Features

1.Low dew point: up to -40℃

2. Ease of maintenance of access process, regeneration, and air

filters

3. Self-adaptive PID temperature control from 60℃ to 180℃

4. No use of cooling water

5. No moving or rotating internal parts

6. No need of manual control, Full auto-adaptive operation

7. On-board heating unit on hopper for less energy loss

CSG series is a fully automatic drying system with zeolite desiccant beds, which Can be used with Hopper Bank Series and multi-hopper systems. It can adapt and automatically control operating parameters based on type and quantity of polymer. Up to 40% energy saving in comparison with traditional dryers

Some plastic materials are hygroscopic. They hold water molecules similarly to a sponge.

These plastics must always be dried before they are processed. Otherwise the molding process will result in sub-standard parts. Streaks and insufficient strength can be traced back to a lack of or insufficient drying.

Criteria for the drying process:

The residual humidity

... is the moisture content that remains after the material has been dried. The permitted level of maximum residual humidity varies according to the material.

The drying time

... is the time in which the material is dried to a required level.

The drying temperature

... is the temperature at which the plastic granulate is dried.

The holding time

... is the total time that the granulate spends in the dryer, from filling to conveying.

Dry air

... is warm air from which the moisture has been removed. As warm air absorbs more water than cold air, the moisture is drawn out of the granulate.

The dew point

... in plastic granulate drying is the temperature at which moisture condenses out of the air onto the material. The lower the dew point, the dryer the air.

The series dehumidifier can automatically adjust the control parameters according to various temperature changes, such as material temperature and air temperature, so as to achieve intelligent control, improve efficiency and save energy.

Jin Machine Ltd is established in 2006 manufacturing quality ancillary equipment for the plastics processing industy.we offer a full range of feeding, conveying, mixing and drying system.

For more than 12 years constant research and development, Jin Machine can offer a full range of quality ancillary equipments, including feeding, conveying, mixing and drying systems from standalone individual units up to very large complex central material handling systems. our
systems stand out for their cost effectiveness and excellent performance.

We have our own factoroy, including machine center, assemble center, all of product is customized which can totally meets our customers' requirements.

Our product includes Feeding and Conveying, Hot Air Drying and Molecular Seive Drying, Mixing and mixing drying and Central Conveying system.

Besides our domestic market, our dehumidifying dryer also face to worldwide market. We pay efforts on developing our foreign market, we give mature technical support, provide 24hrs consultation. Our equipments have remote control system wich can help our customers' solve problem effectively.