Kacise KAN601 Online Ammonia Nitrogen Sensor Patented Probe IP68 Protection Level Easy To Install: 3/4 NPT Thread

KAN601 Online Ammonia Nitrogen Sensor

Application Environment

KAN601 integrated online ammonia nitrogen sensor is fabricated using a PVC membrane-based ammonium ion-selective electrode for testing ammonium ion content in water with temperature compensation to ensure fast, simple, accurate, and economical testing. The technical parameters, maintenance, and communication protocols of the ammonia nitrogen sensor are described in detail in this user manual.

• Signal output: RS-485 bus, Modbus/RTU protocol, convenient to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen, and other third-party equipment.
• In the patented ammonium ion probe, the internal reference solution oozes extremely slowly from the microporous salt bridge at a pressure of at least 100 KPa (1 Bar). Such a reference system is very stable and has a longer electrode life than conventional industrial electrodes.
• Easy to install: 3/4 NPT thread (pipe thread) for easy submersible installation or installation in pipes and tanks.
• IP68 protection level.

Technical Specifications

Dimensional Drawing

Tip: New technology revealed the effect of ammonia

Images of intact mouse brains enabled the researchers to draw these conclusions. By using a new imaging technology called two-photon microscopy they were able to observe the microscopic effect of ammonia on nerve and glial cells in living mice.

The Norwegian researchers behind the discoveries (from left): Alexander Thrane, Erlend Nagelhus and Vinita Rangroo Thrane at the Institute for Basic Medical Sciences, University of Oslo. Photo: Gunnar F. Lothe, UiO.

– Microscopic examination of live cells in undamaged tissue used to be impossible due to the harmful effect of conventional lasers on tissue.

– This all changed with the introduction of two-photon laser microscopy, because this type of microscope delivers ultrashort pulses of light at the focal point without heating or harming the tissue, explains Rangroo Thrane.

New treatment with available drugs

In addition to uncovering the mechanism behind ammonia toxicity, Rangroo Thrane and her colleagues also identified a possible treatment.

The researchers found that the diuretic medicine Bumetanide (Burinex) may reduce the extent of ammonia damage, thereby alleviating the symptoms of ammonia toxicity as well as increasing the probability of survival.

– Bumetanide blocks the transport of potassium chloride into the nerve cells, thereby protecting them from harm. Our study demonstrated that the drug reinstated normal electrical activity in the brain of mice with ammonia poisoning and that it prevented epileptic seizures, says Rangroo Thrane.

The fact that Bumetanide is already being used at Norwegian hospitals as a diuretic in the treatment of heart failure, kidney failure and high blood pressure may shorten the route to a change of treatment regime.

- Further animal testing and clinical trials are required to clarify whether Bumetanide can also be used to prevent ammonia from harming people, says Rangroo Thrane.

The article is also published on Sciencenordic.com

Contact Us

Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.