KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
Brand Name:kacise
Certification:CE
Model Number:KFDO601
Minimum Order Quantity:0-100
Delivery Time:3-10days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Address:
i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Supplier`s last login times:
within 16 hours
Product Details
Company Profile
Product Details
KFDO601 Online Fluorescence Dissolved Oxygen No Electrolyte Is Required And Will Not Be Polarized No Oxygen Consumption
1.Dissolved oxygen measurement applications
- Food and Beverages
- The pharmaceutical
- Energy and electricity
- education
- The government
- water
- Waste water management
2.the Difference of Polarographic probe and optical probe
| Polarographic probe | optical probe | |
| maintence | Replace the electrolyte approximately every 2 months and polish the cathode as needed to clean the probe | Clean probe, cover and optical window as needed |
| storage | Stored in a wet calibration sleeve;For long-term storage, remove the film cover and store in a dry place | Store in a wet calibration sleeve |
| film | Replace approximately every 2 months as needed | no |
| solution | Replace approximately every 2 months as needed | no |
| Need to preheat | (30-60 minutes) if only connected to the meter | |
| stir | need | unnecessary |
| disturb | Ozone, sulfides, sulfur dioxide, nitrous oxide and carbon monoxide |
3.Feature
- No electrolyte is required and will not be polarized.
- No oxygen consumption, not affected by flow rate.
- Built-in temperature sensor, automatic temperature compensation.
- Free from interference by chemicals such as sulfides
- Small drift, rapid reaction, more accurate measurement.
- Long service cycle, lower cost of use.
- Simple replacement of fluorescent cap.
- Rs-485 interface, Modbus/RTU protocol.
- Low power consumption,anti-interference.
4.Technical Specifications
| Model | KFDO601 |
| Measuring principle | Fluorescence method |
| Range ability | 0~20mg/L (0 ≤ 200% saturation) |
| Resolution ratio | 0.01mg/L,0.1℃ |
| Precision | ±2%F.S.,±0.5℃ |
| Temperature compensation | Automatic temperature compensation(Pt1000) |
| Output mode | RS-485 bus, Modbus-RTU protocol |
| Working conditions | 0～45℃,<0.2MPa |
| Storage temperature | -5～65℃ |
| Installation mode | Immersion mounting |
| Cable length | 5 meters, other lengths customizable |
| Power dissipation | ＜0.3W@12V |
| Source | 12～24VDC ±10% |
| levels of protection | IP68 |
| Calibration | Two-point calibration |
| Fluorescent cap life | Guaranteed use for one year (under normal use) |
| Sensor shell material | POM and 316L stainless steel |
5.Dimensional Drawing
Note:The sensor connector is m16-5 core waterproof connector male.
6.Installation
The sensor shall be installed fixedly below the liquid level. The installation and use shall avoid collision or scraping against the surface of the fluorescent film head. The fluorescent film head part shall avoid being attached by the bottom sediment.Remove the rubber cover when use.
Contact Us
Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi
Province, China
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
Inquiry Cart
0