KWL800 76 - 81GHz FM Continuous Wave Radar Water Level Sensor With RS485 Modbus Communication

KWL800 65m Range 76-81GHz FM Continuous Wave Radar Water Level Sensor with RS485 Modbus Communication

Introduction

KWL800 radar level sensor series products refer to frequency modulated continuous wave (FMCW) radar products working at 76-81GHz. The maximum range of the product can reach 65m, and the blind zone is within 10 cm. Because of its higher operating frequency, larger bandwidth, and higher measurement accuracy.

Feature

⚫ Based on CMOS millimeter-wave radio frequency chip, realize more compact radio frequency
architecture, higher signal-to-noise ratio, and smaller blind area.
⚫ Higher measurement resolution and measurement accuracy.
⚫ Narrow antenna beam angle is 6°, the interference in the installation environment will have less
impact on the instrument, and the installation is more convenient.
⚫ Integrated lens design, compact size.

Installation Method

There are two points to pay attention to during installation:

(1) Ensure that the meter is perpendicular to the water surface.

(2) Avoid emitting beams from irradiating interference objects and generating false echoes.

See the following points for typical working conditions.

Ensure that the water level sensor is installed vertically to the water surface, and the tilt will weaken the received signal amplitude, which will affect the normal distance measurement.

Make sure that there are no interference objects within the beam range, such as the banks of rivers.

The instrument should be installed at least 20cm away from the side wall, and the underground pipe network should be installed as close to the center of the well as possible, otherwise the well wall will easily generate interference signals, which will affect the measurement and judgment.

​

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.