Coriolis Titania Mass Flowmeter with nominal diameter 80 and pressure rating 0~4.0MPa

Introduction of Titania Mass Flowmeter

Titania Mass Flowmeter consist of mass flow sensor and mass flow transmitter. It does not measure the volume per unit time (e.g., cubic meters per second) passing through the device, but measures the mass per unit time (e.g., kilograms per second) flowing through the device. The result of volumetric meter varies with temperature, pressure, composition, etc., but mass flow meter does not have such problem.

Operating principle of Titania Mass Flowmeter

Titania Mass Flowmeter is designed according to Coriolis Effect. The inlet arm and the outlet arm vibrate with the same frequency as the overall vibration, but when there is mass flow the two vibrations are out of sync: the inlet arm is behind, the outlet arm is ahead. The two vibrations are shifted in phase with respect to each other, and the degree of phase-shift is a measure for the amount of mass that is flowing through the tubes.

Application of mass flow meter

The KFM Coriolis flow meter family measures direct mass flow rates of liquids and gases in virtually all applications without special calibration. Safety, reliability, quality, and our innovative technologies enables us to provide a broad range of industry-specific products and services — and the expertise to put them to work for you.

Alternative Energy

Oil & Gas

Chemical

Food & Beverage

Industrial Energy

Life Sciences

Marine

Metals and Mining

Power

Pulp & Paper

Refining

Water & Wastewater

Others

Advantages of mass flow meter

1. High reliability

2. It requires low maintenance, because of no movable parts.

3. High accuracy: Generally, it is from 0.15%-0.3%.

4. It is not affected by the fluid, saving the design & installation cost.

5. It shows many parameter simultaneously, such as mass flow, temperature, density, etc.

6. Convenient installation: Generally, there is no specific requirement of choosing upstream or downstream pipe.

7. Wide application: Besides the common fluid, the mass flowmeter can measure other industrial media, such as non-Newtonian fluid, all kinds of slurry, suspensions, etc.