Product Details
KUS600 Series Ultrasonic Sensor
1. Features
- Non-contact measurement
- PVDF casing for corrosion environment
- Low power consumption solution
- Various output options, wide voltage power supply
2. Dimension
Unit in the diagram is mm.
3. Electronic interface and signals definition
Wire color | Pin | Description | Note |
Red | 1 | Power supply | 3.3V-24V |
Black | 2 | GND | |
Yellow | 3 | Analogue output | Low power version hasn’t analogue output |
Blue | 4 | RS485A+ | |
Green | 5 | RS485B- | |
4. Parameter
Model:KUS600 |
Range | 0.6m-5m, low-power product supports wide voltage input, this range
is for 3.3V power supply (6m range customizable) |
Unusable area | 0 ...0.6m |
Power supply | 3.3V-24V |
Power consumption | less than 0.3mA when sleep, less than 20mA when emitting, less than
5mA than when measurement |
Output signal | 0-5V /4-20mA/NPN/PNP/RS485 |
Electrical connection | 5-core cable (analog), 6-core cable (switch) |
Ranging resolution | 1mm |
Measurement accuracy | 0.5%-1 %F.S. |
Temp. compensation | Yes |
Working temperature | -25…70℃(233...358K) |
Storage temperature | -40…85℃(233...358K) |
Protection class | IP68 |
Casing Material | PVDF |
5.Installation conditions
If the sensor is installed at the environment temperature fall
below 0℃, it should do well on the protective measures. In case of
direct mounting of the sensor in a through hole using the nuts, it
has to be fixed at the middle of the housing thread.
6. Ordering information
KUS | Body size | Output | Max range | Description |
| 600 | |
Customized | Customized |
| 4-20mA | 4-20mA mode output with RS485 MODBUS protocol |
0-3.3V | The power supply range is 3.3 at least |
0-5.0V | The power supply range is 5.0 at least |
RS485 | Power save mode with RS485 MODBUS protocol |
| | XX m | XX m is the maxim range can be detected, the default length is 1
meter |
KUS | 600 | RS485 | 3m | |
7.PVDF Corrosion Resistance Data Sheet
Medium | Concentration% | Maximum operating temperature℃ | Medium | Concentration% | Maximum operating temperature℃ | sulfuric acid | <10 | 85 | Oxalic acid | — | 60 | — | <60 | 85 | citric acid | — | 85 | — | 80-93 | 80 | benzoic acid | — | 85 | — | 98 | 65 | Benzoic acid | — | 50 | Cresyl acid | 50 | 60 | acid | — | 60 | nitric acid | <10 | 85 | salicylic acid | — | 85 | — | <50 | 50 | sodium hydroxide | <50 | 75 | — | 70-90 | 25 | Calcium hydroxide | — | 85 | glycolic acid | — | 25 | ammonium sulfate | — | 85 | hydrochloric acid | — | 85 | ammonium nitrate | — | 85 | phosphoric acid | <85 | 85 | Toluene | — | 75 | — | >85 | 85 | Ethylbenzene | — | 50 | hydrofluoric acid | 40 | 85 | Isopropionic acid | — | 60 | Hydroiodic acid | 含12%以上 | 85 | fatty acid | — | 85 | formic acid | — | 85 | Hydroxy acid | — | 50 | Acetic acid | <50 | 85 | calcium chloride | — | 85 | — | 80 | 65 | Ammonium acetate | — | 80 | ice | — | 50 | ammonia | — | 85 | propionic acid | — | 85 | sodium sulfate | — | 85 | oxalic acid | — | 85 | Aluminum nitrate | — | 85 | butyric acid | — | 50 | Sulfite | — | 85 | Hydrocyanic acid | — | 85 | sodium benzoate | — | 85 | Sulfurous acid | — | 85 | sodium bicarbonate | — | 85 | Nitrous acid | — | 70 | magnesium carbonate | — | 85 | carbonic acid | — | 85 | Ferrous chloride | — | 85 | hypochlorous acid | — | 60 | benzene | — | 85 | Methanesulfonic acid | — | 85 | cresol | — | 65 | Benzenesulfonic acid | — | 40 | fluorine | 干或湿 | 20 | malic acid | — | 85 | iodine | 液 | 65 |
|
You may like:
Company Profile
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of
measuring instruments , located in China xi’an City. Since 2008,
Xi'an Kacise focused on the development and production of pressure,
level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical
and management personnel, through efforts of our entire staff, we
have become a professional measuring instrument manufacturer and
solution provider. And we are continuously trying to improve
product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof certificates, etc. which ensure that our products
comply with international standards.

Kacise sensors have already been exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regard “reasonable prices, efficient production time
and good after-sales service” as our tenet, and hope to cooperate
with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices,
and provides industry-leading customer service. We personally get
to know each of our customers, and we know how to discover the most
valuable part of our business , to help others achieve their goals.