KLD2602 Flange Mounting Radar Level Gauge With Purge Function For Dust Environment 26Ghz

Brand Name:kacise
Certification:ce
Model Number:KLD2600
Minimum Order Quantity:0-100
Delivery Time:5-8 work day
Payment Terms:D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Supplier`s last login times: within 16 hours
Product Details Company Profile
Product Details

KLD2602 flange mounting with purge function for dust environment 26Ghz high frequency barn radar level gauge


Product Overview

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 80 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

Principle

Radar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous).


  • The characteristics of 26G radar level meter:

1) Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

2) Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.

3) Serious dust environment on the high level meter work has little effect.

4) A shorter wavelength, the reflection of solid surface inclination is better.

5) Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

6) The measuring range is smaller, for a measurement will yield good results.

7) High signal-to-noise ratio, the level fluctuation state can obtain better performance.

8) High frequency, measurement of solid and low dielectric constant of the best choice.

Parameters


Suitable for MediumStrongly corrosive liquid
ApplicationHCl, H2SO4, HF and strong base in tank, etc.
Measuring Range10m
Process ConnectionFlange, Min. flange is DN80
Medium Temperature-40 ~ 120
Process Pressure-0.1 ~ 0.1MPa
Accuracy±5~10mm
Protection GradeIP67
Frequency Range26GHz
Explosion-proof GradeExia IICT6 Gb
The signal Output4 ~ 20mA/HART(2 wire/4wire),RS485/Modbus is optional

The Electrical Connection

The power supply voltage:

(4~20)mA/HART (Two wire system) The power supply and the output current signal sharing a two core shield cable. The supply voltage range see technical data. For intrinsically safe type must be a safety barrier between the power supply and the instrument.
(4~20)mA/HART(Four wire system) Separate power supply and the current signal, respectively using a two-core shielded cable. The supply voltage range see technical data.
RS485 / Modbus Power supply and Modbus signal line separate drespectively using a two-core shielded cable, the power supply voltage range see technical data.

Applications and Cases:



China KLD2602 Flange Mounting Radar Level Gauge With Purge Function For Dust Environment 26Ghz supplier

KLD2602 Flange Mounting Radar Level Gauge With Purge Function For Dust Environment 26Ghz

Inquiry Cart 0