Milk Fruit Juice Electromagnetic Flow Meter Flow Testing Instrument GXEFM2000 Series
Brand Name:Kacise
Certification:certificate of explosion-proof, CE
Model Number:GXEFM2000
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, T/T, D/P, Western Union, MoneyGram
Place of Origin:China (Mainland)
Contact Now
Add to Cart
Verified Supplier
Address:
i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Supplier`s last login times:
within 16 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Milk Fruit Juice Flow Testing Instrument GXEFM2000 Series Electromagnetic Flow Meter
1. Description
GXEFM2000 series electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewater, food and beverage, pharmaceutical and chemical.
There are two basic components of electromagnetic flow meter.
The advantages of EFM2000 series electromagnetic flow meters are as follows.
1:No obstacle existed in the measuring tube, so the pressure loss is zero, hardly blocked.
2:The request of anticorrosion, wear resistance can be satisfied, if the proper electrodes and lining material are adopt.
3:The measuring results have no relation with the physical parameters of liquid, such as pressure, temperature. Density viscosity, conductivity rate, etc. It is not influenced by the circumstances, so the accuracy is high, working process is stable and reliable.
4: Adopt the dual row flow indicator of back lighted dot array, display the instantaneous and accumulative volume, simultaneously, also displays the working status, parameters, measuring units, etc.
5: The measuring range is available of this flow meter is wide, lt's range rate normally is 20:1, generally can reach 150:1.
6: This flow meter has multi-type outputs, can be matched with computer, combined instrument unit, can meet the requirements of printing, communication and networking.
2. Technical Data
Measuring system
| Measuring principle | Faraday’s law |
| Application range | Electrically conductive fluids |
| Measured Value | |
| Primary measured value | Flow velocity |
| Secondary measured value | Volume flow |
| Flow range | 0.15... 15m/s ; 0.02...+40ft/s |
| Flow medium attribution | Electrical conductivity: ≥5μs/cm Medium temperature range -20 to 392˚F(-29 to 200˚C) Transient 480 ˚F(250 ˚C) Almost all kinds of acid alkali liquid |
Transmitter Selection
260E is a split type electromagnetic Transmitter. 260D and 260A are compact type transmitter.
| Transmitter | General characteristics |
| Infrared handing telecontrol keyboard,all the functions of far-untouched controlling converter. | |
| HART/Analog and Pulse outputs available, Modbus-RTU RS-485 and Pulse output available, Profibus-DP available | |
| Alarm OC outputs available, Empty pipe flow rate abnormal alarm available | |
| Recording time when power turn-off, to record power broken time of instrument system automatically and recruit to count the missing flux；Recording function of hour gross, to record the flux gross by hour, fit for timed measure; | |
| Multi language panel available. | |
| Infrared handing telecontrol keyboard,all the functions of far-untouched controlling converter. | |
| Both 85V--250VAC and16V--36VDC；power supply available | |
| Multi language panel available | |
| Recording function of hour gross, to record the flux gross by hour, fit for timed measure; | |
| GPRS wireless communication available with battery power supply | |
| Multi language panel available. | |
| support multi sensors for 1 transmitter | |
| special for process control industry application | |
| Multi language panel available. |
Sensor type
The pipe diameter of sensor is available from 15mm to 3000mm. choose the proper pipe diameter and size of the application field.
| Norminal Diamter (mm) | Max Process Pressure MPa* | L | D | D0 | H | h | n-Ø |
| 10 | 4.0 | 150 | 90 | 60 | 220 | 102 | 4-Ø14 |
| 15 | 150 | 95 | 65 | 222 | 106 | 4-Ø14 | |
| 20 | 150 | 105 | 75 | 230 | 110 | 4-Ø14 | |
| 25 | 150 | 115 | 85 | 235 | 115 | 4-Ø14 | |
| 32 | 150 | 140 | 100 | 255 | 122 | 4-Ø18 | |
| 40 | 150 | 150 | 110 | 260 | 127 | 4-Ø18 | |
| 50 | 200 | 165 | 125 | 270 | 140 | 4-Ø18 | |
| 65 | 200 | 185 | 145 | 275 | 148 | 8-Ø18 | |
| 80 | 200 | 200 | 160 | 280 | 154 | 8-Ø18 | |
| 100 | 1.6 | 250 | 220 | 180 | 290 | 163 | 8-Ø18 |
| 125 | 250 | 250 | 210 | 320 | 175 | 8-Ø18 | |
| 150 | 300 | 285 | 240 | 330 | 200 | 8-Ø22 | |
| 200 | 1.0 | 350 | 340 | 295 | 340 | 220 | 8-Ø22 |
| 250 | 400 | 395 | 350 | 360 | 240 | 12-Ø22 | |
| 300 | 500 | 445 | 400 | 405 | 285 | 12-Ø22 | |
| 350 | 500 | 505 | 460 | 440 | 30 | 16-Ø22 | |
| 400 | 600 | 565 | 515 | 470 | 350 | 16-Ø26 | |
| 450 | 600 | 615 | 565 | 500 | 380 | 20-Ø26 | |
| 500 | 600 | 670 | 620 | 530 | 410 | 20-Ø26 | |
| 600 | 600 | 780 | 725 | 590 | 470 | 20-Ø30 | |
| 700 | 700 | 895 | 840 | 650 | 530 | 24-Ø30 | |
| 800 | 800 | 1015 | 950 | 720 | 600 | 24-Ø33 | |
| 900 | 900 | 1115 | 1050 | 770 | 650 | 28-Ø33 | |
| 1000 | 1000 | 1405 | 1160 | 830 | 700 | 28-Ø36 | |
| 1200 | 0.6 | 1200 | 1405 | 1340 | 950 | 800 | 32-Ø33 |
| 1400 | 1400 | 1630 | 1560 | 1050 | 900 | 36-Ø36 | |
| 1600 | 1600 | 1830 | 1760 | 1150 | 1000 | 40-Ø36 | |
| 1800 | 1800 | 2040 | 1970 | 1250 | 1100 | 44-Ø39 | |
| 2000 | 2000 | 2265 | 2180 | 1350 | 1200 | 48-Ø42 | |
| 2200 | 0.25 | 2200 | 2405 | 2340 | 1450 | 1300 | 52-Ø33 |
* higher pressure can be specially ordered, there are no product in storage.
Liner Material Selection
| Liner | Notes | Temp limits | Type and Line size | |
| Neoprene | Typically applied to water and sea water. Abrasion resistant to slurries with small particles. | 0 to 185˚F (-18 to 85˚C) | DN 50 - 2000 2 - 80 inch | |
| Polyurethane | Typically applied to slurry (no chemicals). Abrasion resistant to slurries with small particles. special for slurry and chemical slurry | 0 to 140˚F (-18 to 60˚C) | DN15 - 900 0.5 - 36 inch | |
| FVMQ | Typically for high temperature waters, Abrasive resistance, but anti-corrosiveness performance not well | 0 to 392˚F (-18 to 200˚C) Transient 250 ˚C | DN50-1200 2-50inch | |
| F4(PTFE) | BETTER FLUOROPOLYMER More cost effective than PFA. Excellent chemical resistance, but less abrasion resistance than PFA. | -20 to 350˚F (-29 to 177˚C) | DN10 -1600 0.4 -63inch | |
| PFA | BEST FLUOROPOLYMER Excellent resistance to chemicals and abrasion. Suitable for any application. | -20 to 350˚F (-29 to 177˚C) | DN10 – 400 0.4-16 inch | |
| ETFE | GOOD FLUOROPOLYMER Similar chemical and abrasion resistance to PTFE, but a lower maxium temperature and more expensive. | -20 to 300˚F (-29 to 149˚C) | Flanged 15–3000mm 0.5 - 115 inch Wafer 15 - 200mm 0.5 - 8inch |
Electrode Material Selection
| Material | Application Description |
| 316LSST | Standard electrode material. Compatible with most low concentration water based applications. Avoid using stainless in higher concentration acid applications. Such as municipal water supply, Industrial water supply, groundwater process, weak corrosive chemical fluid |
| Hastelloy B | Ideal for hydrochloric acid(concentration lower than10% v/v),phosphate, organic acids, sodium hydroxide. |
| Hastelloy C276 | Use in medium to high concentration acids where SST is not acceptable. Use in applications with high chloride concentrations, such as sea water, |
| Platinum | Ideal for liquor applications found in pulp and paper industry. Also ideal as a spare electrode option to cover nearly every application in a plant. Compatible with nearly every process fluid. |
| Tantalum | Ideal for high concentration acid flows such as hydrochloric and hydrofluoric acids. |
| Titanium | Ideal for high concentration caustic (base) applications such as sodium and potassium hydroxides. |
| wolfram carbide | Ideal for paper pulp, sewage some kind of slurry with micro particles; Not proper for Inorganic acid, Organic acids, oxide fulid. |
Ask for suggestion before ordering about the Electrode Material needed
1. Ordering information
| Model Suffix Code | Description | ||||||||||
| GXEFM2000 | -1200 | -Com | -4mA | -Hart | -DC | -Pt | -Teflon1 | -GR | -D1400 | -Exd IIC T6 Gb | |
| Diameter | -XXXX | Four Digitals: for example:0010: 10mm: 0015:15mm 0100: 100mm 1000: 1000mm | |||||||||
| Transmitter | -Com | Compact type | |||||||||
| -Rem | Remote type | ||||||||||
| -Bat | Battery power supply type | ||||||||||
| -PRO | process control type | ||||||||||
| Signal Outpt | -N | No output | |||||||||
| -4mA | 4-20mA | ||||||||||
| -Pul | 1~5KHz pulse | ||||||||||
| -4Pul | 4~20mA / 1~5KHz | ||||||||||
| Communication | -N | No communication | |||||||||
| -Hart | HART | ||||||||||
| -MOD | MODBUS-RTU | ||||||||||
| -PRO | PROFIBUS | ||||||||||
| -GPRS | GPRS net | ||||||||||
| -CDMA | CDMA net | ||||||||||
| -WHRT | Wireless HART | ||||||||||
| -Other | special order | ||||||||||
| Power Supply | -AC | 85V～250Vac@46～63Hz nominal 20W | |||||||||
| -DC | 20~36VDC nominal 20W | ||||||||||
| -Bat | Battery power supply | ||||||||||
| -Bat+ | Battery +12Vdc dual power supply | ||||||||||
| Other | special request | ||||||||||
| Electorde Material | -316L | Stainless steel 316L | |||||||||
| -HasB | Hastelloy B | ||||||||||
| -HasC | Hastelloy C276 | ||||||||||
| -Pt | Platinum | ||||||||||
| -Ta | Tantalum | ||||||||||
| -Ti | Titanium | ||||||||||
| -WC | wolfram carbide | ||||||||||
| Liner material | -Rub1 | Neoprene(-20-60℃) | |||||||||
| -Rub2 | Neoprene(-20-90℃) | ||||||||||
| -Tef1 | polytetrafluroethylene(-30-120℃) | ||||||||||
| -Tef2 | polytetrafluroethylene(-20-160℃) | ||||||||||
| -P | Polyurethane | ||||||||||
| -FVMQ | FVMQ | ||||||||||
| -PFA | DFA | ||||||||||
| -ETFE | Ethylene tetraflurorethylene | ||||||||||
| Grounding Ring | -N | No grounding ring | |||||||||
| -GR | Grounding ring | ||||||||||
| -GE | Grounding Electrode | ||||||||||
| Wet part Connection attribute | -DXX | DXX: D06, D10, D16, D25,D40 D06: DIN PN6: D10: DIN PIN10D16: DIN PN16; D25: DIN PN25 D40: DIN PN40 etc | |||||||||
| -AX | AX: A1, A3, A6 A1: ANSI 150#; A3: ANSI 300# A6: ANSI 600# | ||||||||||
| -JX | JX: J1, J2, J3 J1: JIS10K; J2: JIS 20K; J3: JIS 30K | ||||||||||
| -WF | Wafer connection (available for DN2.5; DN6 flow meter) Body material: stainless steel | ||||||||||
| -TR | Tri-Clamp for sanitary type (Body material: stainless steel) | ||||||||||
| Explosive-proof grade | -Exd IIC T6 Gb | Exd IIC T6 Gb | |||||||||
| -N | don't need | ||||||||||
Milk Fruit Juice Electromagnetic Flow Meter Flow Testing Instrument GXEFM2000 Series
Inquiry Cart
0