Product Details
Led display,High Accuracy Wireless Pressure Transmitter For
Metallurgical Industry,Zigbee wireless communication
Description
Pressure transmitter is a kind of equipment which converts pressure
into pneumatic signal or electric signal for control and remote
transmission.
It can convert gas, liquid and other physical pressure parameters
sensed by the load cell sensor into standard electrical signals
(such as 4~20mADC, etc.), which can be used to supply secondary
instruments such as alarm, recorder and regulator for measurement,
indication and process adjustment.
The wireless pressure transmitter adopts the wireless remote
transmission module added on this basis, which can form a pressure
acquisition system with our intelligent wireless receiving
terminal. This product is widely used in various industrial
pressure measuring systems, such as oil fields, electric power,
petrochemical and some occasions where wiring is inconvenient.
Application
- Special for pipeline pressure monitoring
- in wild field or non power distribution
- Used in metallurgical industry and chemical industry
Feature
- Accuracy ±0.5%F.S
- Diffused semiconductor core body
- Zig bee wireless communication
- Self-organizing Mesh network
- Use 1# Battery supply Power
- Led display
- Millimeter wave radar, the measurement accuracy can reach up to
±2mm, and the minimum measurement blind zone is 0.05m.
- The smaller antenna size satisfies the measurement of more working
conditions.
- A variety of lens antennas, smaller launch angles, more
concentrated energy, stronger echo signals, and higher reliability
than other radar products under the same industrial and mining
conditions.
- It has stronger penetration and can be used normally in the case of
adhesion and condensation.
- The dynamic signal range is larger, and the measurement of low
dielectric constant media is more stable.
- Multiple measurement modes, radar response in fast measurement mode
Introduction
KLD800 series 80G radar level gauge adopts frequency modulated
continuous wave (FMCW) technology. The antenna emits a
high-frequency FM radar signal, and the frequency of the radar
signal increases linearly. The transmitted radar signal is received
by the same antenna after being reflected by the measured medium.
At the same time, the frequency difference between the transmitted
signal frequency and the received signal frequency is proportional
to the measured distance. The collected frequency difference signal
is subjected to fast Fourier transform (FFT) to obtain the spectrum
of the reflected echo, and the distance to the target to be
measured is calculated based on this.
Electronic interface and signals definition
with air purge
without air purge
Parameter
Spec. | Value |
Type | KLD806 80G | |
Pressure range | 0~0.2MPa......60MPa; 2bar…600bar 29psi…8700psi; 20000MmH20…6118000mmH2O 1.97atm…592stm |
Over pressure safe | 1.5 times span of nominal value |
Secondary Containment | 3 times span of nominal value |
Accuracy | ±0.5% of F.S |
Long term stability | 0.25%F.S/Year |
Operate temperature | -10°C~60°C |
Compensated temperature range | -10°C~60°C |
Media | compatible with Stainless Steel 1Cr18Ni9Ti |
Data transmission channel | Wireless ZIGBEE |
Power supply | 3.6V/1bettery(1 pcs) |
Minimum isolation between case and terminations | 100M Ω@50V |
Surge immunity | 500V@60 second |
Shock and vibration | 10g/5~2000Hz, axes X/Y/Z20g sine 11ms |
Display panel | No display | 0.001~999999 |
Pressure Port: | M20×1.5, G1/4, G1/2, R1/2, NPT1/2 |
Pressure type | Gauge, compound Gauge | React time: 10ms |
EMI/EMC | EMI: EN50081-1/-2; EMC: EN50082-2 |
Company Profile
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of
measuring instruments , located in China xi’an City. Since 2008,
Xi'an Kacise focused on the development and production of pressure,
level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical
and management personnel, through efforts of our entire staff, we
have become a professional measuring instrument manufacturer and
solution provider. And we are continuously trying to improve
product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof certificates, etc. which ensure that our products
comply with international standards.

Kacise sensors have already been exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regard “reasonable prices, efficient production time
and good after-sales service” as our tenet, and hope to cooperate
with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices,
and provides industry-leading customer service. We personally get
to know each of our customers, and we know how to discover the most
valuable part of our business , to help others achieve their goals.