4 piece in massage gua sha tin suction sha tasteless beauty balance
silicone thumb cupping health massage
Main functions:
dredging channels to clear collaterals, activating blood
circulation to relieve pain, reducing swelling and dispersing
knots, removing wind and arthralgia, removing dampness and fever,
removing toxin and removing pus, reinforcing deficiency and
purging, pushing oil and slimming.
Product structure:
the diameter of the can mouth of this product is 37mm; Height:
80mm.
Product features:
environmental protection material, no bad stimulation to skin; Safe
and reliable, no worries about scalds and scratches; Easy to
operate, can cupping anytime and anywhere; Strong suction, not easy
to drop; Tough and durable, easy to clean and disinfect; Appearance
beautiful, can be used as a gift.
Function and scope of application:
cupping therapy has the functions of dredging channels to clear
collaterals, activating blood circulation to relieve pain,
relieving swelling and dispersing knot, removing wind and
arthralgia, removing dampness and fever, detoxifying and removing
pus, reinforcing deficiency and purging, and promoting oil
slimming. Modern medical research, cupping therapy can improve
blood circulation, promote metabolism and high immune ability,
organization adjustment and alleviate the body pain, the heart
rate, blood circulation, blood pressure, breathing, nerve and
endocrine system also to have a two-way benign adjustment. Widely
used in family and personal health care, physical therapy, beauty
and other aspects, can also be used as clinical prevention,
diagnosis, treatment of auxiliary tools
[usage]
A, vacuum pot method
1, press suction method: will carry the pot mouth close to the
treatment place, with your fingers or palm press the pot handle,
make the air out of the pot, and then let go can form negative
pressure, can be sucked, repeatedly press 2-3 times to adjust the
suction.
2, turn pot method: take your turn in the direction of pot handle,
then put the tank bottom clingy, making again to recover flip form,
it can absorb, this method is relatively stronger adsorption force
on the suction tank method.
Ii. Can lifting method
1, direct from the can method: grasp the handle, direct force to
lift the body can out of the skin. This method is suitable for
patients without skin lesions, good skin tolerance, adsorption is
not strong, often used in flash pot.
2, side pot method: press the handle do not move, from the side of
the pot mouth slowly opened. This method is suitable for people
with skin lesions or poor skin tolerance, such as the elderly,
children and other groups, often in the pot when the use.
Three, portable pot commonly used cupping therapy
1. Flash pot: adsorb the pot on the treatment site and immediately
lift and pull it up and down repeatedly until the skin is flushed.
After
2, cans, cupping, indwelling time, general lien 10-20 minutes. The
duration should be determined in combination with the patient's
tolerance and condition.
3, push the tank (also called tank) : generally used for larger
area, muscle fat parts, such as the lower back, abdomen, thighs and
other parts, apply some lubricant for the operation on the parts
first, after sucked on the tank, to hand took pot handle, slowly
rotating, so on the surface of the skin or up and down or so
push-pull moving back and forth several times, until the skin
flush.
4. Pot lifting: after the pot is sucked, grasp the pot body by hand
and pull the skin on it. The skin will not be separated from the
mouth of the pot.
Four, cupping area:
in addition to the face, such as easy to leave a bruise and private
YinChu not cupping place outside, other parts of the body,
cooperate with the related points, the effect is much better.
Five, the time of use: 1 times a day, choose hole alternately, 7-10
days for 1 treatment course, interval of 3 to 5 days, again the
second course of treatment.
Item | silicone cupping set / cupping set hijama / anti cellulite vacuum
cup / ventouse cupping |
Material | Food Grade Silicone |
Color | Blue/White /Customized |
Size | 4pcs/set (4.6*3.3cm;5.5*4.3cm;7.6*5.6cm;10.2*7.3cm) |
Samples Lead Time | 2-5 days |
N.Weight(g) | 286g |
OEM&ODM | Welcome |
Production Process