

Add to Cart
Industrial Ultrafiltration Plant PVDF Water Treatment Equipment Purifier Machine 10M3 Containerized System
1 | Raw pump CNP | |
2 | Sand filter | Runxin Automatic filter valve |
3 | glass fiber reinforced plastics tank dia 750mm*heigh1900mm | |
4 | Upper and lower water distributor | |
5 | Sand sand (large, medium and small) | |
6 | Carbon filter | Runxin Automatic filter valve |
7 | glass fiber reinforced plastics tank dia 750mm*heigh1900mm | |
8 | Upper and lower water distributor | |
9 | Sand sand (large) | |
10 | Activated carbon | |
11 | High quality Cartridge filter | Cartridge filter 7 core 40 inch |
12 | PP filter -40 inch | |
13 | meterflow | |
14 | CHUNKE UF System | Stainless steel Electric control box |
15 | Stainless steel Host bracket | |
16 | Instrument, flow meter, PLC | |
17 | PVC sanitory pipe | |
18 | UF membrane | |
19 | Include | PVC pipe fitting dn50 |
20 | Manual assembly |
Maintain of Ultrafiltration Water Treatment
The chlorine or sodium hypochlorite disinfectant will be used in the periodic backwashing process of the ultrafiltration membrane. In view of the oxidizing property of the residual free chlorine, a reducing agent (usually sodium hydrogen sulfite) addition system should be added at the back end of the ultrafiltration or the front end of the reverse osmosis inlet. Thereby protecting the reverse osmosis membrane from oxidative damage by the oxidant.
Function and purpose of UF Containerized System
Both microfiltration and ultrafiltration are pressure-driven
separation processes that remove almost all suspended matter from
the water. Ultrafiltration also removes partially dissolved organic
matter, depending on the molecular weight of the organic material
and the molecular weight cut-off of the ultrafiltration membrane.
Ultrafiltration membranes for reverse osmosis pretreatment
typically have a molecular weight cut of 20,000 to 750,000 Daltons
(O.002 to 0.05 μm). Ultrafiltration is used as the pretreatment of
reverse osmosis: the process not only has good effluent quality
(SDI value can generally be controlled below 3), but also can
greatly improve the stability of system operation and reduce the
frequency of reverse osmosis chemical cleaning. In addition, the
ultrafiltration system has a small footprint and is convenient for
automatic control. The reverse osmosis system using the
ultrafiltration/microfiltration pretreatment process has become the
development trend of the current industrial water treatment
process.
Can ultra-filtered water be used directly?
The ultrafiltration water purifier uses an ultrafiltration membrane
for purification treatment. This is a microporous membrane with a
uniform pore size of 0.01 micron. Under a certain pressure, when
the stock solution flows through the membrane surface, the
ultrafiltration membrane surface Many fine pores in the dense cloth
allow only water and small molecules to pass through and become
permeate, and substances in the original liquid having a volume
larger than the pore diameter of the membrane surface are trapped
on the liquid inlet side of the membrane to become a concentrated
liquid, thereby realizing the liquid solution. The purpose of
purification, separation and concentration. However, it should be
noted that although the ultrafiltration water purifier can remove
most of the impurities in the water, it is not completely filtered
out for harmful substances such as nitrosamines and bleaching
powder residues that are harmful to human health, so unless the
water quality is relatively good, It is not recommended to drink or
to drink.
Picture for 10M3 Ultrafiltration Water Treatment :
Picture for 10M3 Ultrafiltration Water Treatment :