Single Turn Carbon Composition Potentiometer Rotary Type With Switch RV17-K2
Brand Name:ANYO
Model Number:RV17-K2
Minimum Order Quantity:1000pcs
Delivery Time:8-10 work days
Payment Terms:L/C, T/T
Place of Origin:CHINA
Contact Now
Add to Cart
Site Member
Location:
Ningbo Zhejiang China
Address:
ROOM 1305-2, AUX BUILDING, NO. 757 RILI MIDDLE RD, YINZHOU NINGBO, 315199, CHINA
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
Φ17mm Single Turn Carbon Film Rotary Potentiometer With Switch RV17-K2
Application:
Ideal for lighting adjustment, white goods, automobile etc.
Description:
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor.
Features:
• Long life model
• Rotary type, single unit with switch
• Special tapers
Mechanical specifications:
| Rotational torque | 7~40mN.m (70~400gf.cm) |
| Total rotation angle | 260°±5° |
| Switch working force/torque | 50～300mN.m |
| Shaft stop strength | 3Kgf.cm/min |
| Push pull strength | 70N |
| Rotary life | 10000 cycles |
| Switch life | 10000 times |
| Switch working angle | 30°±10° |
Electrical specifications:
| Temperature range | -10℃~100℃ |
| Rated power | Curve B: 0.1W Other curve B: 0.05W |
| Max. operation voltage | Curve B: AC 200V Other curve B: AC150V |
| Resistance tolerance | ± 20% |
| Resistance range | 1KΩ~2MΩ |
| Rotational noise | ≤ 47 mV |
| Residual resistance | R ≥ 250KΩ 0.1% max. 250KΩ> R> 10KΩ 20 Ω max 10KΩ ≥ R 10 Ω max |
| Resistance taper | A,B,C |
| Switch contact resistance | Less than 20mΩ |
| Dielectric | AC500V for 1 minute |
| Rated switching power | DC12V 1A |
| Welding tin temperature | 235℃±5℃ ≤3s |
| Insulation resistance | More than 50MΩ at DC500V |
Materials used for potentiometer:
| Material | Properties |
| Carbon composition | Carbon composition ink molded on a substrate(phenolic resin). Most common material, low cost and reasonable noise and wear characteristics. |
| Wirewound | Wirewound pots can handle high power,are long lasting and can be very precise. They have however a limited resolution and rough feel. Most used in high power applications (rheostats are often wirewound) or as precision pots. |
| Conductive plastic | Very smooth feel and high resolution, can be constructed to perform millions of cycles. Can only handle a limited power and are expensive. Often used in high-end (audio) equipment where a high resolution and low noise are important. |
| Cermet | Very stable, low temperature coefficient and handles high temperatures well. On the other hand quite expensive and often limited amount of cylces allowed(special long-life cermet pots also exist). Often used for trimpots which do not have to be adjusted often. |
Dimension:
Single Turn Carbon Composition Potentiometer Rotary Type With Switch RV17-K2
Inquiry Cart
0