40ka Four Pole SPD Pluggable Ac Line Surge Protector Arrester
Brand Name:BRITEC
Certification:TUV
Model Number:TY-40 4P
Minimum Order Quantity:200 piece / pieces
Delivery Time:15-30 days after payment
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Address:
Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Supplier`s last login times:
within 34 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
20ka-40ka Power Surge Protective Devices 320V Four Pole SPD Pluggable AC Surge Protection Plastic
20ka-40ka Power Surge Protective Devices 320V Four Pole SPD
Description:
• Intensity of Remote Signaling Alarm Contact.
• AC power surge protection devices are designed to meet all your
surge protection needs for any low voltage installation.
• Failure indication.
• This DIN rail mounted surge protector is easy to install in any
standardized distribution pane or control cabinets.
• High discharge capacity and low residual voltage.
• Module design, convenient installation.
• Over-temperature protection.
• IP20, UL94 V0.
• Britec offers a line of surge protectors for the single and three
phase AC networks connected to sensitive equipment.
20ka-40ka Power Surge Protective Devices 320V Four Pole SPD Product Details:
| TY150 40 4P | TY275 40 4P | TY320 40 4P | TY385 40 4P | TY440 40 4P | |
| SPD classification according to EN61643-11 | Type 2 | Type 2 | Type 2 | Type 2 | Type 2 |
| SPD classification according to IEC61643-11 | Class II | Class II | Class II | Class II | Class II |
| Max. continuous operating a.c. voltage Uc | 150V | 275V | 320V | 385V | 440V |
| Nominal discharge current (8/20us) In | 20kA | 20kA | 20kA | 20kA | 20kA |
| Max. discharge current(8/20μs) Imax | 40kA | 40kA | 40kA | 40kA | 40kA |
| Voltage protection level Up | ≤0.8kV | ≤1.3kV | ≤1.5kV | ≤1.8kV | ≤2.0kV |
| Voltage protection level 5kA Up | ≤0.6kV | ≤1kV | ≤1.2kV | ≤1.4kV | ≤1.6kV |
| Max. backup fuse | 125A gG | 125A gG | 125A gG | 125A gG | 125A gG |
| Response time tA | ≤25ns | ≤25ns | ≤25ns | ≤25ns | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state / fault indication | green / red | green / red | green / red | green / red | green / red |
| Cross-section area (Min.) | 4mm2 | 4mm2 | 4mm2 | 4mm2 | 4mm2 |
| Cross-section area (Max.) | 35mm2 | 35mm2 | 35mm2 | 35mm2 | 35mm2 |
| For mounting on | 35mm Din rail | ||||
| Enclosure material | Thermal plastic UL94-V0 | ||||
| Degree of protection | IP20 | IP20 | IP20 | IP20 | IP20 |
Product picture:
20ka-40ka Power Surge Protective Devices 320V Four Pole SPD Main
Features:
• Imax - 40kA/Phase (8/20μs waveform)
• Uc - 320V for sub distribution board
• Up –low protection level 1.5kV/phase.
• Class II AC surge protector designed for low-voltage power supply
system protection against surges at the boundaries from lightning
protection zone 1-2 and higher.
• Short action response time, only 25ns.
• Pluggable design, 4 poles, easy replaced without any tools
• Advanced anti-surge components MOV.
• Comply with IEC 61643-11.
• State-of-the-art surge protection technology.
• Surge arrester is suitable for TN-S system of AC 50/60Hz.
• Failure status indicator, green/red.
• When the SPD fails in breakdown for over heat or over-current,
the failure release will help electric equipment separate from the
power supply system and give the indication signal
• Simple installation, easy maintenance
20ka-40ka Power Surge Protective Devices 320V Four Pole SPD
Applicable Scope:
1. Low voltage main power distribution cabinet or distribution box
of the buildings
2. Type 2 Surge Arresters provide protection against overvoltage
originating from switching and the secondary effects of lightning
strikes.
3. Floor distribution box of buildings
4. These devices will discharge current having an 8/20μs waveform
and provide a low voltage protection level of ≤1.5kV (Up) for
sensitive electronic equipment exceeding the requirements for
category II equipment identified
5. Out-door power distribution cabinet/Box.
Our Services:
- • 17 years global leading profession manufacture of electrical products surge arrester• All products will be well packed before shipping• Standard packaging, and you can also tell us your own requirements on packaging• Faster delivery• Individually Tested Prior to Shipment
Installation:
- • The type 2 arresters must install into sub-distribution boards after main distribution boards containing type 1 arresters.• For proper operation between type 1 and type 2 arresters at least 10- 15 m cable or wire must be otherwise a decoupling coil have to install between the two devices.• In areas where storms are frequent, it is strongly recommended to install additional protection systems.
Certificate:
Company profile:
Wenzhou Britec Electric Co., Ltd is a manufacturer and trading company located in Yueqing city, Zhejiang province, we have more than 17 years experiences in SPD producing. Our factory is equipped with advanced machinery, also we created much experience in new product development, so can customize products per your requirements. We know that cooperation, support and service is most important and hence employed experienced and customer friendly sales, this ensures a good understanding of your requirements, on time delivery and ultimately a satisfied customer base. We are not just thriving, but growing day by day, we always provide our customers with highly quality products in affordable cost; we sincerely hope to have you as our esteemed customer and friend.
Laboratory equipment:
Shipping:
FAQ:
1. How can I get a quotation?
--Kindly provide us your details request, leave us an inquiry or email and we will response promptly!
2. How to pay for order?
--T/T, Paypal, L/C, ect.
3. How can I trust you and your company?
--We are focusing on the long term relationship with customers, we have worked with thousands of customers since company built 17 years ago, customers always make highly complimentary remarks
4. What’s the process of order?
--Send us Inquiry→get quotation→payment done→mass production.
5. When can I expect the customized product to be finished?
--Sample: 7 working days (Standard).
--Bulk order: 20 working days (Standard).
6. Delivery & Shipment
--Air shipping, Couirer (DHL, UPS, FEDEX, TNT, EMS, ect ), Sea shipment(FCL/LCL).
40ka Four Pole SPD Pluggable Ac Line Surge Protector Arrester
Inquiry Cart
0