IEC61643-11 120ka 3 Phase MOV Power Surge Protection Device SPD
Brand Name:BRITEC
Model Number:TY1-120 4P
Minimum Order Quantity:100 Piece/Pieces
Delivery Time:Shipped in 15 days after payment
Payment Terms:L/C, D/A, T/T, Western Union
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Address:
Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
120ka Power Surge Protector 3-Phase MOV Class II SPD 385 Vac
Voltage Device
120ka Power Surge Protector 3-Phase MOV Class II SPD Details:
• 120kA 385V Type 2 Class C AC Surge Protection Device, Surge
Arrester, AC SPD, Surge Arrester for 3 Phase Supply.
• Surge Protection Device for transient electrical over-voltages.
• Core components are strictly screened, stable performance and
reliable operation.
• Class 2 SPD for typical waveforms of 8/20 μs
• Surge voltage arrester for mounting on 35 din rail.
• End of Life indicator light.
• Option to remotely monitor the status of the surge protector.
• Employs 'MOV' metal oxide varistor technology.
• A surge protector attempts to limit the voltage supplied to an
electric device by either blocking or shorting to ground any
unwanted voltages above a safe threshold.
• TY1-120 series surge protective device basis GB18802.1 as well as
IEC61643-1 design and production, suitable for AC TT, TN and other
power systems. Prevent all kinds of electronic and electrical
equipment from being damaged by lightning overvoltage.
• Also available in different voltage range.
120ka Power Surge Protector 3-Phase MOV Class II SPD Technology
characteristic:
| TY1-120 4P | |
| SPD classification according to IEC61643-11 | Class II |
| Max. continuous operating a.c. voltage Uc | 385V |
| Nominal discharge current (8/20us) In | 60kA |
| Max. discharge current(8/20μs) Imax | 120kA |
| Voltage protection level Up | ≤2.5kV |
| Max. backup fuse | 315A gG |
| Degree of protection | IP20 |
| Enclosure material | Thermal plastic UL94-V0 |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Relative Humidity | ≤95% |
| For mounting on | 35mm Din rail |
| Color | White, Gray, Black, Red, Yellow and Customized |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| OEM | Yes |
Dimension:
120ka Power Surge Protector 3-Phase MOV Class II SPD Features:
• Easy to operate.
• The surge protector has a large flow rate, a low residual voltage
and a fast response time.
• Low output residual pressure to further ensure safety.
• With a power status indication indicating the working status of
the surge protector.
• Long service life.
• The structure is rigorous and the work is stable and reliable.
• Built-in overheating and temperature control circuit breaker
• Excellent functionality.
120ka Power Surge Protector 3-Phase MOV Class II SPD Product
introduction:
• Britec provides safety protection for all kinds of electronic
equipment, instruments and communication lines. It is mainly used
to limit overvoltage and discharge electric current.
• Surge protector is usually connected with protected equipment.
When overvoltage is generated, it can play the role of shunting and
voltage limiting. To prevent excessive current and voltage damage
to equipment, play the role of protection devices.
Notice of product:
1. Determination of discharge current path
2. Grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
3. This product needs no special maintenance. The lightning
arrester should be checked regularly, especially in the
thunderstorm season and the whole thunderstorm period. When the
system fails to suspect the lightning arrester, the lightning
arrester can be dismantled and rechecked. If the system is restored
to normal after the restoration to the state before use, the
lightning arrester has been damaged and must be replaced
immediately.
Our Company:
Wenzhou Britec Electric Co.,Ltd. established since 2003, is one
professional SPD manufacturer in Zhejiang Province, China. We are
located in Yueqing city. We specialize in design,manufacture and
sell all variety of high quality surge protection products. Our
specialty is to provide the customized products, and OEM/ODM
products, etc. Here we are sincerely hope to establish one good
long-term business relationship with customer through this
opportunity, based on equal, mutual beneficial and win-win business
from now till the future.
Production process:
Certification:
FAQ:
1)Q: Who are we ?
A: We are a professional factory, we currently have customers in
more than 50 countries and regions around the world.
2)Q: Can I print our logo on the products and change the color of
products?
A: Yes,all color and pattern available, we can also do OEM servise.
3)Q: Can i get a sample?
A: Of course, but you may need to pay sample charge which will be
returned after any order signed.
4)Q: What certificates your products have?
A: Most of our products have CE, TUV and CB certificates. Don't
worry about the quality!
5)Q: What's your delivery time?
A: Usually it can be within 30 days!
6)Q: What is your accept payment method?
A: We can accept TT, Paypal. 30% deposit and 70% before shipment!
IEC61643-11 120ka 3 Phase MOV Power Surge Protection Device SPD
Inquiry Cart
0