Add to Cart
DTS - 4R 3 Phase KWH Meter DIN Rail Active Electronic Energy Meter Register Display
PRODUCT INFORMATION
DTS-4R 3-Phase DIN rail Energy Meter accord with relevant technical requirements of class 1 single phase
active energy meter stipulated in international standard IEC
62053-21. It can accurate and directly measure 50Hz or 60Hz active
energy consumption from single phase AC electricity net
Functions:
1. 35mm standard DIN rail installation, complying with standard DIN
EN50022. Or front board setting (mounting holes center distance 63
mm), users can choose any one by themselves.
2. Six pole width (Modulus 12.5mm), complying with standard
JB/T7121-1993.
3.Standard configuration 5+1 digits display (99999.1kWh) by step
motor type impulse register. May select 6+1 digits display (Product
Configuration code is AK).
4.Standard configuration one port of pulse output passive
(polarity),May select increase a distant port of pulse output
passive (nonpolarity), (Product Configuration code is AI).
5.And contact with all kind of AMR system conveniently,complying
with standard IEC 62053- 31 and DIN 43864.
6.Two LED instructions power supply state (green) and signal of
energy impulse (red).
7.Standard configuration dont detection direction of the flow of
load current. May select automatic detection the direction of the
flow of load current. And instructions (Only red energy impulse
signal when working, that is meaning the direction of the flow of
load current reverse).
8.Single direction measure single phase two wire active energy
consumption. It is nothing with direction of the flow of load
current. Complying with standard IEC 62053-21.
SPECIFICATIONS
Rated Current(A) | 3/1.5(6),3/5(20),3/10(40),3/15(60),3/20(80),3/30(100) |
Rated Voltage(V) | Three-phase three-wire 3x100V or 3x380V Three-phase four-wire 3x200/380V or 3x57.7/ 100V |
Rated Frequency(Hz) | 50 or 60 |
(Accuracy class) | Class 1.0 or Class 2 |
APPEARANCE