Add to Cart
Automatic Small Cardboard Medicine Box Cosmetics Box Foler Gluer
Machine
5. Working principle and adjusting method:
The fold of the paste box machine is folded and shaped according to
the vein of paper box pressed trace. If the pressed trace is too
shallow or the paper box is unaligned, the paste box machine can
not fold the needed paper box, so before using the equipment,
please carry out the check to the paper box sample plate. Take a
sample plate to be held with hand slightly and then tighten the
edge, have a check whether the pressed trace of the paper box is
accurate. All unqualified pressed trace paper boxes are forbidden
on this equipment.
The paper feeding table is mainly in accordance with the paper
sheet specification to adjust the distances between two gear paper
plates, paper dividing gague position and paper out interval, make
the paper convey successfully, steadily, not appear to any
phenomenon of conveying double sheets, multi-sheets and no paper
conveying. Adjustment method:
A. Adjust the distances between twp baffles according to the paper
sheet width. First loosen the adjustable handle on the two baffles,
put the paper sheets on the middle position of the paper sending
table, move the two baffles approach towards the paper sheets, at
the end adjust the two baffles and paper sheet both sides in
parallel and remain a few space so as to let the paper sheets move
in horizontal.
B. It’s necessary to carry out the adjustment to the paper dividing
gague position according to the different size of the paper sheets
needed to be pasted. In general the two paper dividing gague can be
distributed evenly at the between of two baffles, the front and
behind distances should be proper. When adjusting, only loosen the
adjustable handle shown as Fig. 2, then move the slide block on the
beam to left and right and paper dividing gague to front and
behind, so as to make the paper dividing gague meet the desired
position and then tighten the handle. Meanwhile, determine the
conveying belt root number and make sure the paper sheets in level
and tidy.
C. Adjust the interval δ between the paper dividing gague and
conveying belt according to the paper sheet thickness. In general δ
is the thickness of a piece paper. Adjustment method: Rotate the
star-shape handwheel upward or downward, which can make the paper
dividing gague move up and down so as to change the interval sizes.
6. Paste box size
SHH-800AG
Type of boxex | Amax | Amin | Bmax | Bmin | Cmin | Dmin | Fmin |
No-edged bottom box | 700mm | 700mm | 620mm | 110mm | 8mm | 70mm | 51mm |
Edges bottom box | 700mm | 160mm | 570mm | 180mm | 9mm | 90mm | 85mm |
SHH-1200AG
Type of boxex | Amax | Amin | Bmax | Bmin | Cmin | Dmin | Fmin |
No-edged bottom box | 700mm | 110mm | 840mm | 110mm | 8mm | 70mm | 51mm |
Edges bottom box | 700mm | 160mm | 790mm | 180mm | 9mm | 90mm | 85mm |