

Add to Cart
Engine 4JG2 4HK1 6WG1 6HK1 6HK1T 6RB1 6SD1 6BG1 6BG1T 6BD1 4BG1T 4BD1 4JB1 4JB1T For Isuzu Diesel Motor TD27 Engine
Engine Model | For Isuzu Truck 4JB1T |
Engine Series | 4JA1 4JA1T 4JB1 4JB1T |
Displacemen | 2.771L |
Rated Power | 68KW(91.12 HP)@3600rpm |
Description:
1, Vehicle Model: ISUZU TRUCK
2, Pack Quantities: 1PCS
3, Net Weight: 280KG
4. Volume:0.8CBM
5, H/S Code:Engine HS:8408909290 Gearbox HS:8708409910
6, Fig.No.- Key No:
7.Mark: TAI; if customer have demand based on customer demand
Delivery Time: 15-20 days after deposit
Package: Customized Wooden Box
UOM: pcs
MOQ: Small quantity is accepted , but we offer quantity discount. MOQ 1PCS
Warranty: 3 Months
PICS:
Package And Loading:
Tips:
Check the cylinder compression pressure
(1) The engine temperature should be about 80 ° C, and the degree
of battery discharge should not be less than 50%.
(2) Blow away the dust outside the spark plug, remove the spark
plug of each cylinder, and open the throttle and the damper door
completely.
(3) Place the rubber tube of the cylinder pressure gauge on the
first cylinder spark plug hole and hold it firmly.
(4) Use the starter to drive the crankshaft to rotate, write down
the pressure number shown in the pressure gauge, test more than
twice in a row, and then check the remaining cylinders in turn.
(5)〕 When the cylinder pressure is lower than the specified
standard, 20 to 30g of new lubriing oil can be filled to the top of
the piston, and the pressure can be tested again, if it rises
significantly, it means that the piston ring is worn. If the
pressure is the same as before, it indies that the valve or
cylinder gasket is leaking and should be further examined.
The main reasons for insufficient compression pressure of the cylinder:
(1) the cylinder gasket is damaged.
(2) The valve gap of the intake valve and the exhaust valve is
adjusted improperly.
(3) The inlet valve or exhaust valve and seat are not tightly
sealed.
(4) The piston ring is installed incorrectly and is not installed
according to the original factory regulations.
(5) The piston ring and the cylinder are seriously worn, or the
piston ring is stuck in the piston ring groove.
ISUZU | TRUCK 4JB1T /PICKUP 4JB1T/4HK1 |
CUMMINS | 3.9L 4BT/5.9L 6BT/8.3L 6CT |