Customized Memory Keepsake Box , 3D Baby Hand And Footprint Frame DIY Newborn Gift
Brand Name:Babyby or customized
Certification:SGS; MSDS
Model Number:BY05-19
Minimum Order Quantity:500pcs
Delivery Time:30 work days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Active Member
Location:
Xiamen Fujian China
Address:
310A, Building A，No.379 of xianhoushe，Huli District,Xiamen City, Fujian Province, China(Mainland)
Supplier`s last login times:
within 45 hours
Product Details
Company Profile
Product Details
Baby Keepsake Box 3D Baby hand and footprint frame Customized DIY Newborn Gift
| Product information | |||
| Product Name | Baby Keepsake Box 3D Baby hand and footprint frame Customized DIY Newborn Gift | ||
| Frame Size | 40 x 25 x 6.8 cm | Product Material | Pine wood |
| Function | Gift | Product Color | Wooden, White or customized |
| Powder weight | 1.5 kg | Product MOQ | 500PCS |
| Application | Baby memory gift | Clay color | White or customized color |
| Packaging | Color box | Sample details | Sample cost:70USD |
| Accessories | Clay, pthoto frame | ||
| Lead Time | 30 days | Deliver Time | 25-30 days |
| Specifications | |||
- frame - clone powder - golden painting | |||
Product Introductions :
Baby keepsake box is a meanful gift for baby and a family, Many
years later, when you have grown up, you have faded away from the
cute appearance. I will carefully pick up the photo frame on the
table, which contains a little cute, I only hope that you will grow
up slowly.
No matter how far you go in the future, every time I touch this memory, I can feel the sweetness you bring.
Your first cry made me wet my eyes. Since then, my life track has changed. Your crying, your smile, every bit of it wants to be preserved, leaving you a gift for growth after many years
Product Information
1 ) baby name : child 3D hand and foot print set (square)
2 ) Photo Frame Size : The outer frame is about 40 x 25 x 6.8cm, and the hollow thickness is about 6.8cm.
3 ) Photo frame texture : white frame polymer environmental protection material, black, walnut color, wood color frame for high density board wood, both materials are not deformed without cracking
4 ) Photo Frame Type : can be placed directly, without bracket, not pendant
5 ) set content :
- Three-dimensional thickened photo frame 1 set
- Membrane powder 1 packs 150g + molding powder 1 packs 200g, 2 packs can be made as shown in Figure 2, and 1 pack is used for practice.
- Golden pigment, silver pigment optional
- Brush one
- A piece of glue
- A detailed description
2 ) Photo Frame Size : The outer frame is about 40 x 25 x 6.8cm, and the hollow thickness is about 6.8cm.
3 ) Photo frame texture : white frame polymer environmental protection material, black, walnut color, wood color frame for high density board wood, both materials are not deformed without cracking
4 ) Photo Frame Type : can be placed directly, without bracket, not pendant
5 ) set content :
- Three-dimensional thickened photo frame 1 set
- Membrane powder 1 packs 150g + molding powder 1 packs 200g, 2 packs can be made as shown in Figure 2, and 1 pack is used for practice.
- Golden pigment, silver pigment optional
- Brush one
- A piece of glue
- A detailed description
How to Make 3D Mold :
Step 1 ) Pour 50g of cloned powder into a graduated cup containing 300ML of
water (water temperature is preferably 25-35 degrees), and quickly
stir it with a stir bar for 40-60 seconds. The stirring method is
preferably egg-type stirring. The higher the water temperature, the
faster the cloning powder solidifies.
Step 2 ) The stirred cloning powder slurry is shaken a few times to make the bubbles float up, and poured into the cup, put the baby's hand into the cloning powder slurry, and stand still for 2-3 minutes (do not let the baby hand touch the cup) Wall), you can apply some moisturizer to your baby's hand before putting it into the cloning solution.
Step 3 ) First press the cloned powder slurry to completely solidify, then shake the baby's hand up and down, so that the air slowly enters and slowly take out the baby's hand. Remember to be careful and careful, take out the mold and prepare it (in the process of taking the hand must be Be slow, don't worry, prevent damage to the already cloned clone model)
Step 4 ) First, fill the solidified clone powder model with water and then pour the water out to another container. Divide the poured water into two. The amount of the model powder is 2.5-3 times the half volume of the baby hand (the volume of the baby hand = the volume of the poured water), and it is fully stirred for about 1-2 minutes. After the stirring, the mixture will be The model slurry is shaken a few times to make the bubbles float.
The ratio of baby's hand clone powder to water is: 50G clone powder + 300ML water
Step 5 ) The fully stirred model powder slurry is shaken vigorously for a few times to float the bubbles and then inject the model slurry into the already solidified clone powder model, and shake evenly to reduce the bubbles (the baby's fingers are naturally slightly curved, and the model powder cavity should be First, it is inclined to form a small amount of filling mold. After a few seconds of static injection, the mold is filled. If the baby's finger is fist-shaped, first apply a small amount of filling in the direction of the baby's finger, then put the cloned powder cavity upside down for about one minute before continuing to mold.
Step 2 ) The stirred cloning powder slurry is shaken a few times to make the bubbles float up, and poured into the cup, put the baby's hand into the cloning powder slurry, and stand still for 2-3 minutes (do not let the baby hand touch the cup) Wall), you can apply some moisturizer to your baby's hand before putting it into the cloning solution.
Step 3 ) First press the cloned powder slurry to completely solidify, then shake the baby's hand up and down, so that the air slowly enters and slowly take out the baby's hand. Remember to be careful and careful, take out the mold and prepare it (in the process of taking the hand must be Be slow, don't worry, prevent damage to the already cloned clone model)
Step 4 ) First, fill the solidified clone powder model with water and then pour the water out to another container. Divide the poured water into two. The amount of the model powder is 2.5-3 times the half volume of the baby hand (the volume of the baby hand = the volume of the poured water), and it is fully stirred for about 1-2 minutes. After the stirring, the mixture will be The model slurry is shaken a few times to make the bubbles float.
The ratio of baby's hand clone powder to water is: 50G clone powder + 300ML water
Step 5 ) The fully stirred model powder slurry is shaken vigorously for a few times to float the bubbles and then inject the model slurry into the already solidified clone powder model, and shake evenly to reduce the bubbles (the baby's fingers are naturally slightly curved, and the model powder cavity should be First, it is inclined to form a small amount of filling mold. After a few seconds of static injection, the mold is filled. If the baby's finger is fist-shaped, first apply a small amount of filling in the direction of the baby's finger, then put the cloned powder cavity upside down for about one minute before continuing to mold.
Step 6 ) Pour out the solidified clone powder model, and slowly peel off
the model of the solidified baby hand from the clone powder model.
Pay attention to the moderate intensity, don't worry.
FAQ:
1.Q:Are you a factory or trading company?
A:We are a factory with excellent price-performance ratio of items.
The larger your order quantity is, lower the unit price will be.
2.Q:What information should I provide for making my own plate and trays?
A:Tell us the styles or forms,material,dimension,surface process,printing requirement,and quantity of your items.
3 Q:Do you have MOQ?
A:Depands on different ideas, Can be negotiated.
The larger the quantity is, the competitive the unit price will be.
Depands on different ideas, Can be negotiated.
4.Q:Can you help with the design?
A:Yes,we have professional designers offering free designing
service.
If you can provide artwork or pictures,please send them to us in
the following formats:cdr,eps,jpg,ai,psd,pdf.
5.Q:When can I get the quotation?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
6.Q:Shall I need to prove the brand/logo ownership and offer the certificate of authorization?
A:Yes, and we make your items after receiving the certificate of ownership and authorization.
7.Q:Can I get a sample,is that for free?
A:Samples in stock can be sent to you directly after you pay the
freight. Only printing fee and mould charge you need to pay for in
making samples.
8.Q:What about the lead time for bulk production?
A:It depends on the order quantity and the production season.
9.Q:How long can I get the sample?
A:After we receive the relevant expenses,samples will be ready and
sent to you via express in 7-10 workdays.
10.Q:What payment methods do you accept?
A:We support T/T,and L/C and so far.
Customized Memory Keepsake Box , 3D Baby Hand And Footprint Frame DIY Newborn Gift
Inquiry Cart
0