

Add to Cart
Spiral Fire Escape Slide / Shared Type Residential Fire Escape
Slide
Fire Escape Slide Advantages
The Fire Escape Slide consists of three layers: outer fire
prevention, middle layer insulation, smoke isolation and inner
layer guide slip. Each layer had high tensile strength of the pipe,
the middle layer position with a special rubber ring, rubber ring
with elasticity, make the human body produce certain resistance
after buffer, so the rubber makes people slow down speed of about
1.5-4 meters per second to safety down to the ground. The escape
chute has four supporting bands, which can prevent the wind from
being blown and turned by the wind at the fire scene; it is used to
protect the safety of the escaping; it is suggested to escape one
person every 3 seconds and escape continuously. The escape chute
can be designed according to the height of the building. It is
suitable for any place and any building in the height of 60 meters.
If it is more than 60 meters, it can be installed at any height.
Convenient installation and operation of escape chute. Do not limit
the number of users, theelderly and infirm can be used; the
external escape slide made of fire retardant materials, fire escape
can delay the flames invasion; escape escape can not see the ground
scenery, no fear; small area, do not use electric power, operating
cylinder and high safety. The escape chute is usually placed in the
stainless steel airtight box, which is waterproof, insect proof and
pollution resistant. It can be stored for a long time and easy to
maintain. Can be equipped in high-rise buildings, fire ladders,
fire trainingtowers, oil drilling platform, airport control tower,
high-speed rail(EMU), hospitals, schools, office buildings and so
on.
Fire Escape Slide Main technical parameters
Name: | Fire Escape Slide | Type: | Spiral / Shared Type |
---|---|---|---|
Distance From Landmar: | H800mm | Standard Weight: | 35-80kg |
Number Of Passengers In Emergency: | 22 Person/L 20m Slide Gauge | Design Glide Speed: | ≤3.5m/s(Self Controllable) |
Fire Proof Jacket High Temperature Resistance: | 600c | Application: | Residential |
Fire Escape Slide type:
escape chute is the door to escape the lives of the victims in the
fire. Because opportunities are reserved for people who are
prepared. In the event of fire, there is an escape chute, and the
people in the building can escape from the scenein the first place.
According to the different building or the use of different places,
choose different types of suitable escape chute set with the
following four kinds. High rise building window escape chute
High rise building window Fire Escape Slide
Outdoor type: It is usually a stainless steel storage bracket
combination box placed in the house near the window. When it is
used urgently, first open the stainless steel storage box and lift
the slide frame out of the window, then put the escape chute (cloth
bag) outlet into the room. The slide frame frame hole relies on the
slide down force, and the slide slide to the ground can complete
the evacuation of the person.
Indoor series type Fire Escape Slide
Corridor, platform type escape chute: first make the house corridor
and balcony make a 75*75 cm square hole, each floor is fitted with
the floor height matching escape chute. When emergency occurs, as
long as the operating mechanism is pulled, stored in the stainless
steel storage tank in each floor of the escape chute will
automatically droop to each lower floor. Evacuate the affected
people quickly and safely from dangerous areas.
Spiral Fire Escape Slide
Shared Fire Escape Slide
The construction of a vertical outdoor smoke rush shaped channel
from the ground layer to the height of each floor, are connected in
series to form a closed fire pipe structure, each floor has a fixed
point and an escape pipe entrance box, closed at twenty-four hours
on the escape slide, and then put it directly without once there is
a fire or emergency evacuation, save time.
Mobile Fire Escape Slide
For fire ladders, fire ladders to rescue when the height of the
fire scene to be specified, if the escape slide is too long, is to
save staff will be unable to find export.
Escape slide is too short, rescue staff will die. To solve this
problem, we have produced a splicing escape chute, which consists
of 3 meters,2 meters and 1 meters length slipway.